99Cra - ICP DAS USA I-7540D User Manual

4.24

99CRA

Description: Clear the CAN error flag and FIFO, and then re-initialize the CAN
hardware chiip of the module.

Syntax: 99CRA
99CRA

Response:
Valid Command: No response.
Invalid command: ERROR

Note:
After sending this command, the CAN receive and transmit FIFO will be
clear. The error counter of reception and transmission will be set to zero.
And the TX and RX LEDs will turn OFF.

Example:
Command (ASCII): 99CRA
Command (HEX): 39 39 43 52 41
Note:
1.
This command can only be accepted by 7540D's port 10000
2.
Supported by
I-7540D CAN-Ethernet Gateway User's Manual (Version 1.8, March/2021)
Command character.
the fi
rmware v1.2.2 or later.
90