fantastic furniture Como Robe 2 Door Manual page 6

Step 3
You will need
7 x Cam Bolts Phillips Head
(H3) Screwdriver
Attach 7 x Cam Bolts (H3) to Right Side Panel (P3) as shown.
Step 4
You will need
1 x Cam Bolt 1 x Cam Nut
(H3) (H4)
Phillips Head
Screwdriver
Attach 1 x Cam Bolt (H3) into the hole of Rail (P8) as shown.
Insert 1 x Cam Nut (H4) into the hole of Shelf Panel (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolt.
Push Shelf Panel (P4) into place and tighten the cam nut.
Step 5
You will need
2 x Catapult
2 x Catapult
Base (H12) (H13)
4 x Small Phillips Head
Screws (H5) Screwdriver
fantasticfurniture.com.au fantasticfurniture.com.au
H3
H3
(P4)
H4
H3
(P8)
(P1)
Attach 2 x Catapult Base (H12) to Top Panel (P1)
with 4 x Small Screws (H5) as shown,then insert
2 x Catapult (H13) into the catapult base.
H3
H3
(P3)
This is how a cam nut works........
H5
H5
H12
H3
H3
H3
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H12
H13
H12
Page 6