Network - Advantech OW-1000A Owner's Manual

4.2

NETWORK

4.2.1 Network
4.2.1.1 Operating Mode-Access Point
IP Assignment
DHCP
Choose "DHCP (Dynamic)" if your router supports DHCP and you
want the router to assign an IP address to the AP. In this case, you
do not need to fill in the following fields.
Manual
Choose "Manual" if your router does not support DHCP or if for any
other reason you need to assign a fixed address to the AP. In this
case, you must also configure the following fields.
IP Address
The IP address of the AP on the local area network. Assign any
unused IP address in the range of IP addresses available for the
LAN. For example, 192.168.1.101.
Subnet Mask
Figure 4-8
28