Wi-Fi 1; Wi-Fi 2; Wi-Fi 3; Wi-Fi 4 - Advantech OW-1000A Owner's Manual

4.3.1

Wi-Fi 1

Wireless Settings
Radio Status: Enable/Disable SSID.
Wireless Role: This SSID will act as Station or Access Point. Note: only
first SSID can act as station.
Radio Mode: Set 11g, 11b or 11b+g mode.
Radio Channel: Select radio channel or use auto.
Peer Node Distance: Set distance between this CPE and it's adjacent.
SSID: Set (extended) service set ID, a.k.a. netwrok name.
Transmission Power: Set transmission power in dBm, Note: H/W may
not xmit power as high as you set, depends on H/W faculty.
VLAN Tagging ID: Set this SSID's VLAN tag when VLAN tagging
enabled.
Maximum Associated Stations: Restrict maximu number of
associated stations.
Layer 2 Isolation: Prevent packets exchange between associated
stations.
Frag. Threshold: Fragmentation threshold.
RTS Threshold: RTS threshold.
Beacon Interval: Beacon interval in TUs.
WMM Tx: Set WMM parameters for packet transmission.
WMM Station: Set WMM parameters that provide for station.
Security:
WEP: Set WEP key in hexdecimal
WPA-Personal: WPA with pre-shared key.
WPA/WPA2-Personal: WPA and WPA2 co-existance with pre-shared
key.
WPA-Enterprise: WPA, key provided by RADIUS server.
WPA/WPA2-Enterprise: WPA and WPA2 co-existance, key provided by
RADIUS server.
4.3.2

Wi-Fi 2

4.3.3

Wi-Fi 3

4.3.4

Wi-Fi 4

33