Hotspot Captive Portal - Advantech OW-1000A Owner's Manual

HotSpot Captive Portal

HotSpot: Enable/Disable captive portal function. Note, the CPE will
become router mode and ALL ssid in Access Point role after HotSpot
enabled.
Domain: Set domain name for hotspot.
Primary Radius: Set primary radius server for hotspot user
authentication.
Secondary Radius: Set backup radius server for hotspot user
authentication.
NAS ID: Set CPE's NAS ID in RADIUS frames.
Called Station Name: Set CPE's station name in RADIUS frames.
NAS Location: Set CPE's location name in RADIUS frames.
NAS Location ID: Set CPE's location ID in RADIUS frames.
UAM Server: The URL for hotspot user login.
UAM Secret: The encryption key between UAM server and CPE.
UAM Allowed List: IPs/Hostnames that hotspot can visit before login.
Figure 4-11
31