Drive Carrier Leds - Supero SUPERSERVER 2027TR-HTQRF User Manual

When notifi ed of an alert, check the routing of the cables and make sure all fans
are present and operating normally. You should also check to make sure that the
chassis covers and air shrouds are installed. Finally, verify that the heatsinks are
installed properly. This LED will remain fl ashing or on as long as the temperature
is too high or a fan does not function properly.
•
NIC: Indicates network activity on either LAN1 or LAN2 when fl ashing.
3-4

Drive Carrier LEDs

The SC217 chassis uses SATA drives.
SATA Drives
Each SATA drive carrier has two LEDs.
•
Blue: Each Serial ATA drive carrier has a blue LED. When illuminated, this blue
LED (on the front of the SATA drive carrier) indicates drive activity. A connection
to the SATA backplane enables this LED to blink on and off when that particular
drive is being accessed.
•
Red: The red LED to indicate an SATA drive failure. If one of the SATA drives
fail, you should be notifi ed by your system management software.
Chapter 3: System Interface
3-3