Aerotech AGV-HP Series Hardware Manual page 8

Safety Procedures and Warnings
DANGER: To decrease the risk of electrical shock, injury, death, and damage to the
equipment, obey the precautions that follow.
Electrical installation must be done by qualified personnel.
l
Before you do maintenance to the equipment, disconnect the electrical power.
l
Before you connect wires to this product, disconnect the electrical power.
l
Do not connect or disconnect electrical components, wires, and cables while this
l
product is connected to a power source.
Restrict access to the galvo when it is connected to a power source.
l
Make sure that all components are grounded correctly and that they obey the local
l
electrical safety requirements.
Supply each operator with the necessary protection from live electrical circuits.
l
Install the necessary precautions to supply safety and protection to the operator.
l
It is the responsibilty of the system integrator or qualified installer to determine and
l
meet all safety and compliance requirements when they integrate the AGV-HP(O)
into a completed system.
IMPORTANT: The protective ground connection of the AGV-HP(O) provides motor
frame ground protection only. Additional ground and safety precautions are required
for applications that require access to the AGV-HP(O) while it is energized.
DANGER: Use of this product increases the risk of exposure to visible and/or invisible
laser radiation.
Do not stare into the laser beam, put your body parts in the laser area, or expose
l
yourself to reflections from powerful beams.
Wear certified laser safety eye protection.
l
Avoid eye or skin exposure to direct or scattered radiation.
l
DANGER: High pressure air can cause severe injury.
Lock out the source and bleed off the pressure before you do service to the equip-
l
ment.
Wear eye protection.
l
Wear ear protection.
l
WARNING: To prevent damage to the equipment and decrease the risk of electrical
shock and injury, obey the precautions that follow.
Only trained operators should operate this equipment.
l
Use this product only in environments and operating conditions that are approved in
l
this manual.
Make sure that the product is securely mounted before you operate it.
l
All service and maintenance must be done by approved personnel.
l
Keep the scan head free of foreign matter and moisture to prevent a reduction in its
l
performance and life expectancy.
WARNING: Securely mount and position all system cables.
8
AGV-HP(O) Hardware Manual
www.aerotech.com