NordicTrack Apex 4500 User Manual page 15

HOW TO USE A PRESET PROGRAM
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
2. Select one of the preset programs.
To select one of the ten
preset programs, press
the Program Select but-
ton repeatedly until the
number of the desired
program appears in the
Calories/Pulse display.
As each preset
program is se-
lected, the maxi-
mum speed set-
ting of the pro-
gram and the
maximum incline
setting of the program will flash in the displays for a
few seconds. The Time/Distance display will show
how long the program will last. A profile of the
speed settings of the program will scroll across the
matrix.
3. Press the Start button or the 1 Step Speed in-
crease button to start the program.
A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
Each program is divided into 30, 50, or 60 one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed setting and/or incline set-
ting may be programmed for two or more consecu-
tive segments.
During the work-
out, the profile
will show your
progress. The
flashing segment
of the profile rep-
All manuals and user guides at all-guides.com
Current Segment
resents the current segment of the workout. The
height of the flashing segment indicates the speed
setting for the current segment. At the end of each
segment, a series of tones will sound and the next
segment of the profile will begin to flash. If a differ-
ent speed or incline setting is programmed for the
next segment, the speed or incline setting will ap-
pear in the display to alert you.
The workout will continue in this way until the last
segment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or in-
cline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To change the intensity level of the entire program,
press the Intensity increase and decrease buttons.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the 1 Step Speed increase button. The walk-
ing belt will begin to move at 1 mph. When the next
segment of the workout begins, the treadmill will
automatically adjust to the speed and incline set-
tings for the next segment.
4. Follow your progress with the matrix and the
displays.
See step 5 on page 13.
5. Measure your heart rate if desired.
See step 6 on page 14.
6. Turn on the fan if desired.
See step 7 on page 14.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 14.
15