Table of Contents
Advertisement
1.1 Overview
This chapter provides a brief outline of the functions and features of the 1029TP-DTR/DC0R/DC1R.
The 1029TP-DTR/DC0R/DC1R is based on the X11DPT-PS motherboard and the
SC809H-R1K05P3 chassis.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below.
Description
Twinpro X11 air shroud
Backplane adapter card with 6 SATA ports (1029TP-DTR only)
Backplane adapter card for LSI 3008, SAS 12Gbs, with six ports
inside (1029TP-DC0R only)
Backplane adapter card for LSI 3108, SAS 12Gbps, with six ports
internal (1029TP-DC1R only)
1U 8-port 2-node 12-Gbps backplane for 4x2.5" SAS3/SATA3 HDD/
SSD
Black gen 3 hot-swap 2.5-inch HDD tray
40x40x56 mm, 20.5K-17.6K RPM, counter-rotating fan for 1U Twin
Pro series servers
1U passive CPU heat sink with a narrow retention mechanism
1U passive CPU heat sink with a 26-mm wide middle air channel
with a narrow retention mechanism
1U LHS TwinPro riser card with one PCI-E x16 slot
1U RHS TwinPro riser card with one PCI-E x16 slot
Outer rail (quick) for 1U 17.2"W chassis
26" Inner rail, front, quick-release type
1.2 Unpacking the System
Inspect the box the SuperServer 1029TP-DTR/DC0R/DC1R was shipped in and note if it was
damaged in any way. If any equipment appears damaged, please file a damage claim with
the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
Chapter 1
Introduction
Main Parts List
9
Chapter 1: Introduction
Part Number
MCP-310-21716-0B
BPN-ADP-6SATA3P
BPN-ADP-S3008L-L6IP
BPN-ADP-S3108L-H6IRP
BPN-SAS3-809H
MCP-220-00047-0B
FAN-0167L4
SNK-P0067PS
SNK-P0067PSM
RSC-P-6
RSC-R1UTP-E16R
MCP-290-00102-0N
MCP-290-00130-0N
Quantity
2 per node
2 per node
2 per node
2 per node
1 per node
8 (4 per node)
3 per node
2 per node
2 per node
2 per node
2 per node
1 set
1 set
Advertisement
Table of Contents
