Siom Modules - Supermicro TwinPro 1029TP-DTR User Manual

SIOM Modules

In addition, the 2028TP-HTR/HC0R/HC1R was designed to accept one of four different SIOM
modules (Supermicro I/O Module) to satisfy the specific I/O functions required by the system.
The various SIOM modules are as follows:
•
AOC-MGP-i2M: two RJ45 (1GbE) ports supported by an Intel i350-AM2 controller.
•
AOC-MGP-i4M: four RJ45 (1GbE) ports supported by an Intel i350-AM4 controller.
•
AOC-MTGN-i2SM: two SFP+ (10GbE) ports supported by an Intel 82599ES controller.
•
AOC-MTGN-i4SM: four SFP+ (10GbE) ports supported by an Intel XL710-BM1 controller.
•
AOC-MTG-i2TM: two RJ45 (10GbE) ports supported by an Intel X550 controller
•
AOC-MTG-i2TM: two RJ45 (10GbE) ports supported by an Intel X550 controller
•
AOC-MHIBF-m2Q2GM: two RJ45 (40GbE) supported by an Intel i350 controller, and two
QSFP (56GbE) supported by an Mellanox® ConnectX-3 Pro InfiniBand FDR controller
•
AOC-MHIBF-m1Q2GM: two RJ45 (40GbE) supported by an Intel i350 controller, and one
QSFP (56GbE) supported by an Mellanox® ConnectX-3 Pro InfiniBand FDR controller
Installing a SIOM Module into the Chassis
1. Take out the five screws securing the two front riser brackets in the chassis.
2. Remove the two screws from the Pulling Ear and one screw from the side of the SIOM
mounting bracket.
3. Flip the chassis and take out the two screws securing the sled back.
4. Flip back the chassis upward and take out the SIOM bracket.
Figure 3-12. Removing the Front Riser Brackets and Pulling Ear
Chapter 3: Maintenance and Component Installation
49