TwinPro 1029TP-DTR/DC0R/DC1R User's Manual
Assembling the Outer Rails
Each outer rail comes in two sections that must be assembled before mounting onto the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend outward. Match
the left front outer rail with the left rear outer rail and the same for the right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot in the
front rail (A), and slide the front section into the rear section.
Secure to the
front of the rack
Slide outer rails
together
Round Hole
A
Assembling the sections
of the outer rail
Outer rail assembled
Figure 2-3. Assembling the Outer Rails
20
Secure to the rear
of the rack
B
Bracket with
Square Pegs