Table of Contents
Advertisement
Installing the Riser Card
Installing the Riser Card
1. Use the control panel to power down the computing node, and pull the node drawer out
of the chassis.
2. Remove the riser card bracket, removing the screw on the back of the drawer.
3. Align the riser card mounting hole to the bracket standoff and secure the riser card to
the bracket using the two screws included in the accessory box.
4. Insert the riser card into the slot on the motherboard.
5. Secure the riser bracket to the rear of the node drawer.
Chapter 3: Maintenance and Component Installation
Figure 3-10. Installing the Riser Card
47
Advertisement
Table of Contents
