Sliding The Chassis Onto The Rack Rails - Supermicro TwinPro 1029TP-DTR User Manual

TwinPro 1029TP-DTR/DC0R/DC1R User's Manual

Sliding the Chassis onto the Rack Rails

Installing the Chassis into a Rack
1. Align the rear of the chassis rails with the front of the rack rails and then push evenly
on both sides of the chassis. The spring latch engages when the chassis is part way in.
Push the server completely into the rack.
2. (Optional) Insert and tighten the thumbscrews that hold the front of the server to the
rack.
Note: The figure above is for illustrative purposes only. Always install servers at the bottom
of the rack first.
Warning: Do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Figure 2-5. Installing the Server into a Rack
22