1.5 Motherboard Layout
Below is a layout of the X11DPT-PS with jumper, connector and LED locations shown. See
the table on the following page for descriptions. For detailed descriptions, pinout information
and jumper settings, refer to Chapter 4.
Notes:
•
See Chapter 4 for detailed information on jumpers, I/O ports, and JF1 front panel connec-
tions.
•
" " Indicates the location of Pin 1.
•
Jumpers/components/LED indicators not indicated are used for internal testing only.
IPMI_LAN
UID_LED1
VGA
JUIDB1
PHY
COM1
BMC
BATTERY
JSDCARD1
SIOM:CPU1 PCI-E 3.0 X16
BT1
JBT1
BMC SD CARD
JSIOM1
HDD_LED
PCH
SXB2
CPU1
BIOS
LICENSE
X11DPT-PS
Rev. 1.10
SXB1
CPU2
Figure 1-4. Motherboard Layout
13
Chapter 1: Introduction