Assembling The Outer Rails - Supermicro SUPERSERVER 6018U-TR4+ User Manual

SUPERSERVER 6018U-T Series User's Manual

Assembling the Outer Rails

Each outer rail comes in two sections that must be assembled before mounting
onto the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend outward.
Match the left front outer rail with the left rear outer rail and the same for the
right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot
in the front rail (A), and slide the front section into the rear section.
Secure to the
front of the rack
Slide outer rails
Round Hole
Assembling the sections of
1
A
Outer rail assembled
Figure 2-3. Assembling the Outer Rails
together
1
B
the outer rail
2-6
Secure to the
rear of the rack
Bracket with
Square Pegs