Espressif ESP8266 Manual page 17

#
- Select the "Serial" page in the "Properties" window to check the configuration of
If AT commands are used, the baud rate should be 115200, and the "New Line
•
Mode" should be set because the AT commands end with a new line (CR-LF).
Espressif
the serial connection.
"
Figure Ⅰ-5. Checking the "Serial" in "Properties" Window
"
Figure Ⅰ-6. Setting the "New Line Mode" for AT Commands
14 19 # /#
Appendix I
2016.09