Espressif ESP8266 Manual page 16

#
If it is the first time you are using the SecureCRT, create a new serial port connection.
•
Set the configuration by referring to the screenshot below. Choose "Serial" protocol
and no flow control. Set the actual port number by finding out the assigned port from
the "Device Manager" of PC.
- If the serial port connection was created before, users can change its
Espressif
#
Figure Ⅰ-3. Creating a New Serial Port Connection
configuration by right-clicking on it, and selecting "properties".
#
Figure Ⅰ-4. Checking the "Properties" of the Serial Port
13 19 # /#
Appendix I
2016.09