Subscribe to Our Youtube Channel
Related Manuals for Feider Machines FRB900
Summary of Contents for Feider Machines FRB900
- Page 1 Warning: Please read the manual carefully before using the unit! BUILDER 32 Rue Aristide Berges Zi Du Casque 31270 Cugnaux France MADE IN PRC...
-
Page 2: Description Of The Symbols
DESCRIPTION OF THE SYMBOLS The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and cannot replace correct actions for preventing accidents. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS WARNING! Read all safety warnings and instructions. Failing to follow the warnings and instructions can result in an electric shock, a fire and/or a serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
-
Page 5: Ntended Use
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: - lead from lead-based paints, - crystalline silica from bricks and cement and other masonry products, and - arsenic and chromium from chemically-treated lumber. -
Page 6: List Of Main Parts
LIST OF MAIN PARTS 1. Main handle 2. ON/OFF Switch 3. Cutting depth adjusting knob 4. Depth scale 5. Drive belt cover 6. Dust exhaust tube 7. Spanner 8. Drive belt 9. Blade barrel 10. Spacer 11. Blade 12. Blade support block 13. -
Page 7: Operation
OPERATION Before use Before making assembly, changing and adjustment for any accessory, disconnect the tool from the mains supply to avoid any unintentional starting. Please always check the mains supply voltage before use! It must correspond with the rating label on the appliance. Remove any packing material and loose parts from unit. - Page 8 Chamfering edges For chamfering edges use the V-grooves in the front base. Set cutting depth adjusting knob in “0” position and then run the planer along the corner edge. Caution! Always test out first on a piece of scrap material for chamfering edges. Mounting and replace blades CAUTION! Always switched off the tool and unplug it from the power supply before installing.
- Page 9 Clamping screw Blade Blade ridge NOTE: Always change the blades at the same time, otherwise imbalance can cause vibration and reduce the blades and tool life. CAUTION! Do not attempt to adjust the blade with cutter block screws, which are pre-set at manufacturing.
-
Page 10: Maintenance
Dust suction The dust will be collected by the dust exhaust tube to the vacuum cleaner during use. To assembly the vacuum cleaner, please follow below steps: Remove the accessories on soft tube of vacuum cleaner. Connect the soft tube to the dust exhaust tube directly. APPLICATION ADVICE CAUTION! Always switched off the tool and unplug it from the power supply before installing. - Page 11 Repair of the tool must only be carried out by a qualified repair technician. Repair or maintenance by unqualified personnel can lead to a risk of injury. Use only identical spare parts for repairing a tool. Follow the instructions in the maintenance section of this user manual.
- Page 12 EC Declaration of conformity BUILDER 32, rue Aristide Bergès - ZI 31270 Cugnaux – France declare that the machine Designation: 900W planer Model: FRB900 Serial number: 20210922221-20210922724 Is in conformity with the European Directives: Machine Directive 2006/42EC EMC Directive 2014/30/EU...
-
Page 13: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor. -
Page 14: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 15: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the FRB900 and is the answer not in the manual?
Questions and answers