Advertisement
About Manual Operation
When you need to control the camera in manual mode rather than using Autoframing, you can use
The RF remote
n
The web interface (accessible from your computer's browser or using a Vaddio Device Controller)
n
A third-party control device
n
When you use the manual controls, Autoframing pauses. It's similar to cruise control in a car: Using a preset or
directional control is like tapping the brake pedal. The camera remains under manual control until you resume
Autoframing.
Operating the Camera from the Web Interface
The web interface is available on the Vaddio Device Controller touch panel (if your installation uses one) or from
a computer's web browser.
The operator's Camera page provides most of the same controls as the remote:
Audio and video mute
n
Camera standby
n
Pan, tilt, and zoom
n
Camera presets, if any have been stored
n
Custom color/lighting settings, if any have been stored
n
If your installation does not include a Vaddio Device Controller or other control surface, contact the system
administrator to find out how to access the web interface.
2
Advertisement
