Connections For Playback On A Tv Screen - Canon MV MVX2i Instruction Manual

Connections for Playback on a TV Screen

You can connect the camcorder to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camcorder (
E
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
Switching the AV/Headphone Terminal
Through the menu, the camcorder's AV/headphone terminal can be switched
to function as either the AV terminal or the headphone terminal.
+
TAPE CAMERA
( 38)
Open the menu and select VCR SET UP. Then select AV/PHONES and
set it to AV or PHONES and close the menu.
• When the terminal is switched to PHONES, PHONES appears in the display.
Using the headphones
• Make sure you switch the AV/headphones terminal to PHONES before
using headphones. If the AV/headphones terminal is not switched to
PHONES before you use the headphones, noise will come out from the
headphones.
34
PLAY
,
+
TAPE
(VCR)
VCR SET UP
AV IN/OUT
MIC
IN/
OUT
,
+
CARD CAMERA
AV/PHONES•••AV
11).
PLAY
,
+
CARD
(VCR)