Connections For Playback On A Tv Screen - Canon Optura Pi Instruction Manual

#2_OPTURA Pi_E(07-33)

Connections for Playback on a TV Screen

You can connect the camera to a TV or VCR in order to play back your
recordings. You will need to attach a power source to the camera (
E
Power off all devices before starting the connections.
See your TV or VCR instruction manual for further details.
If your TV (or VCR) has an S (S1) -video input terminal
For higher picture quality, we recommend playing back recordings on a TV with
an S (S1) terminal. If you connect the camera to a TV with an S1 terminal or the
Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
• Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-
250N Stereo Video Cable to connect the AUDIO terminals. Connect the white
plug to the white AUDIO terminal L (left). Connect the red plug to the red
AUDIO terminal R (right). Do not connect the yellow plug.
• Set the TV/VIDEO selector on the television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
30
1/25/00 13:41 Page 30 (1,1)
S-150 S-video Cable
S
IN/OUT
DC IN
STV-250N Stereo Video Cable
9.5V
A/V
IN/OUT
MIC
11).
INPUT
S(S1)-VIDEO
VIDEO
AUDIO
L
R