Canon MV MVX2i Instruction Manual page 143

+
TAPE CAMERA
CARD MIX
( 38)
Make sure a memory card that has images recorded on it and a cassette
have been inserted into the camcorder.
Select
1. Make sure the camcorder is set to the Q (program AE) mode.
• You cannot use Card Mix in the Night or Super Night recording
program.
2. Open the menu and select \ CARD MIX.
3. Press the CARD +/– buttons to select the still image to be
combined.
4. Select MIX TYPE.
• CARD CHROMA, CARD LUMI., CAM. CHROMA and C.ANIMATION
settings appear.
5. Select the desired setting.
• Your currently recording image is combined with the pre-recorded still
image.
6. Select MIX LEVEL.
7. Adjust the mix level.
• Turning the selector dial upwards adjusts to the right and turning
downwards adjusts to the left.
8. Close the menu.
• CARD MIX flashes in the display.
On/Off
9. Press the CARD MIX button.
• CARD MIX stops flashing.
• Your currently recording image is combined with the pre-recorded still
image.
• Each time you press the card MIX button, your selection is activated
(display lights continuously) or deactivated (display flashes).
MIX TYPE••••CARD CHROMA MIX LEVEL••• – +
E
143