Canon MV MVX2i Instruction Manual page 129

Notes:
• To cancel a print mark, move the frame to the print-marked a still image,
set the number of prints to 0 (Zero) with the selector dial and press the
selector dial in. The
• If there are a large number of images recorded on the memory card, it may
take time for a print mark to appear on a still image.
Erasing All Print Marks
PLAY
+
CARD
(VCR)
CARD OPER.
( 38)
Make sure a memory card that has a still image recorded on it has been
inserted into the camcorder.
1. With a still image in the display, open the menu and select
CARD OPER.
2. Select PRINT MARKS
• ERASE ALL PRINT MARKS
3. Select YES.
• The print mark disappears from the still image.
4. Close the menu.
print mark disappears.
PRINT MARKS
ALL ERASE.
? YES NO appears in the display.
ALL ERASE
E
129