Canon MV MVX2i Instruction Manual page 102

5. Press the AUDIO DUB. button.
E
• AUDIO DUB. and
6. Press the PAUSE button (and start play on the other audio
device if AUDIO IN).
• Audio dubbing starts.
• Direct your voice into the microphone.
• changes to
7. When you get to the point where you wish to stop dubbing,
press the STOP button (and then stop play on the other
audio device if AUDIO IN).
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set zero set memory (
audio dubbing, then every time you return to that position, audio
dubbing will cancel.
• If instead of pressing STOP you press PAUSE, the camcorder will return
to the playback pause mode.
Notes:
• You cannot use the DV terminal while adding sound.
• You might want to adjust the audio mix (
tape with added sound.
• There may be a loss of sound quality if you add sound to a tape recorded
on a camcorder other than the MVX2i.
• After adding sound 3 or more times to the same place on a tape, there
may be some loss in sound quality.
102
appear on the display.
.
88) at the place you want to stop
103) when playing back a