Turning The Image Stabilizer Off - Canon MV MVX2i Instruction Manual

Turning the Image Stabilizer Off

E
With most camcorders, even the slightest hand movements will be noticeable
during telephoto recording. However, the MVX2i's Optical Image Stabilizer
allows you to obtain steady recordings even at high magnification. Unlike
electronic image stabilizers, it causes no loss of picture quality. The Optical
Image Stabilizer can compensate for a wide range of camcorder movements
— you can record stable images even if you are shooting from a moving car.
+
TAPE CAMERA
( 38)
To turn the image stabilizer off, open the menu and select
CAM.SET UP. Then select IMAGE S.
the menu.
• The i mark disappears from the display when the stabilizer is off.
• The image stabilizer cannot be turned off when the program selector is set
to the [ (Easy Recording) position.
Notes:
• Keep the image stabilizer turned off when the camcorder is mounted on a
tripod.
• The image stabilizer is designed to deal with a normal degree of camcorder
shake.
• The image stabilizer is not as effective as usual during the Low Light, Night
and Super Night mode.
58
,
+
CARD CAMERA
CAM.SET UP
IMAGE S . ••ON
i
, set it to OFF and close