Canon MV MVX2i Instruction Manual page 156

Preparing the Lens Cap
E
• Attach the cord to the grip belt, and
then to the lens cap, passing the cord
through the hole on the lens cap
from front side.
• Hook the lens cap on to the grip belt
while you are recording, and place it
over the lens when you have
finished.
Fastening the Grip Belt
• Rotate the viewfinder downwards.
• Release the Velcro fastening and hold
the camcorder with your right hand
while you adjust the belt with your
left.
Your index finger should reach the
zoom control and photo button, and
your thumb should reach the
start/stop button comfortably.
156