Playing Back A Tape - Canon MV MVX2i Instruction Manual

Playing Back a Tape

E
MIX/
SLIDE SHOW
You can use the LCD screen for instant, on-the-spot playback. The camcorder
also plays back the sound track via the built-in speaker (
• When you play back a tape, you can also close the LCD panel with its
screen side facing outward.
• When you wish to use the viewfinder to view playback, close the LCD
panel. The built-in speaker does not sound. Use headphones to monitor the
sound.
For playing back your recordings on a TV, see p. 34.
For using the wireless controller, see p. 48.
Note:
• To avoid accidental recording, slide the tab on the cassette so that it
exposes the hole (the switch position is usually labelled SAVE or ERASE
OFF).
1. Attach a power source and turn the POWER switch to PLAY
(VCR).
• The power indicator lights up.
2. Make sure the TAPE/CARD switch is set to TAPE.
3. Load the cassette.
4. Press the e (play) button to start playback.
• To end playback, press the
• To wind the tape forwards, stop playback and press the
forward) button.
• To wind the tape backwards, stop playback and press the
button.
• If the playback picture is rough (mosaic-like noise), clean the video
heads using a Canon DVM-CL Digital Video Head Cleaning Cassette or
a commercially available digital video head cleaning cassette.
30
INDEX
SCREEN
CARD
REC SEARCH
3
(stop) button.
CARD TAPE
33).
1
(fast
`
(rewind)