Connections For Playback On A Tv Screen - Canon ZR Instruction Manual

Connections for Playback on a TV Screen

You can connect the camera to a TV or VCR in order to play back your
recordings. See your TV or VCR instruction manual for further details. You will
E
need to attach a power source to the camera (see p. 8), and for S-video or to use
an RF Unit, attach the DU-100 Docking Unit.
Attaching the DU-100 Docking Unit
The Docking Unit is fitted with
video, audio, microphone and
editing terminals. Connect it to the
base of the ZR via the
MULTI-CONNECTOR.
1. Make sure that the ZR is switched off.
2. Lift the MULTI-CONNECTOR cover and align the multi-connectors
of the docking unit and the camera.
3. Push the docking unit onto the camera and turn the locking button
clockwise to fix it securely onto the base.
• To remove, turn the locking button counter-clockwise and pull the docking
unit from the base of the camera. Close the cover.
• You cannot attach/remove a power source while the Docking Unit is attached.
If your TV (or VCR) has an S-video input terminal
• Use the S-150 S-video Cable to connect the S-video terminal d. Use the STV-
150 Stereo Video Cable, to connect the AUDIO terminals. Connect the white
plug to the white AUDIO terminal 7 (left). Connect the red plug to the red
AUDIO terminal 9 (right). Do not connect the yellow plug.
• Set the TV/VIDEO selector on the television to VIDEO.
• If you are connecting the camera to a VCR, set the input selector on the VCR to
LINE.
22
SETSCREW
LOOSEN
S-150 S-video Cable
STV-150 Stereo
Video Cable
L R
V S
TIGHTEN
INPUT
S-VIDEO
VIDEO
AUDIO
L
R