Placing And Installing The Equipment - Master Bilt BGR15 Installation And Operation Manual

PLACING AND INSTALLING THE EQUIPMENT

ENVIRONMENTAL CONDITIONS
T . T
HIS UNIT CANNOT BE INSTALLED IN ENVIRONMENTS WITH EXPLOSIVE GASES HE EQUIPMENT IS
.
DESIGNED ONLY FOR INDOOR OPERATION
The unit must be located in an indoor environment where the ambient is
o
maintained less than 90 F/65%RH.
For the correct performance of the refrigerating system, it is very
important to leave at least 10 cm (4") of free space both at the sides and
back to allow proper air circulation.
The location of the cooler must be kept away from sources of heat and
humidity including direct sunlight, toasters, ovens, coffee warmers, other
appliances condenser air discharge, infrared heaters, or other heat
generating appliances. Keep the unit away from external doors.
The unit should be leveled prior to operation.
The unit must have casters, 6" legs, or sealed to the floor per NSF guidelines.
•••• www.master-bilt.com • Pg. 4 ••••