Digital View SVX-4096-SDM Instructions Manual
  1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. SVX-4096-SDM
  6. Instructions manual

Digital View SVX-4096-SDM Instructions Manual

Intel sdm, dvi, hdmi interface controller for tft panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Intel
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design - Diagram of a suggested system
4. Assembly notes - Important information about system elements
6. Connection & Operation - How to use the controller
12. Connectors, pinouts & jumpers - Essential connection information
47. Warranty, Caution & Limitation of Liability, Trademarks
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd - Ver 1.0
®
SDM, DVI, HDMI INTERFACE CONTROLLER
FOR TFT PANEL
Model: SVX-4096-SDM
Part number : 4176700XX-3 or up
INSTRUCTIONS
Sept 13, 2018 (SVX-4096-SDM_manual.doc)
Page 1 of 49

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SVX-4096-SDM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital View SVX-4096-SDM

Summary of Contents for Digital View SVX-4096-SDM

  • Page 1: Table Of Contents

    32. Specifications 33. Appendix I – RS-232 control protocols and command set 44. Appendix II - Mapping definition 46. Appendix III – DV remote control unit work for SVX-4096-SDM 47. Warranty, Caution & Limitation of Liability, Trademarks 48. Contact details 49.
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the SVX-4096-SDM is a feature rich interface controller for :  TFT (active matrix) LCD panels of 4096x2160 resolutions in 60Hz with V-by-One and eDP interface.  TFT (active matrix) LCD panels of 1920x1080 resolution in 60Hz with LVDS interface.
  • Page 3 SYSTEM DESIGN A typical LCD based display system utilizing this controller is likely to comprise the following: Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 3 of 49...
  • Page 4 Panel cable: In order to provide a clean signal it is recommended that all panel cables (V-by-One signal and LVDS) supplied by Digital View. Care should be taken when placing the cables to avoid signal interference. Inverter/Backlight driver: This will be required for the backlight of an LCD, some LCD panels have an inverter/backlight driver built in.
  • Page 5 Refer to graphics modes table in specifications section for supported modes.  Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 5 of 49...
  • Page 6 Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 6 of 49...
  • Page 7 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up Digital type Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 7 of 49...
  • Page 8 5800 5000 3200 sRGB User : R [0-255] G [0-255] B [0-255] Color Effect: Standard [Default] Game Movie Photo Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 8 of 49...
  • Page 9 Saturation Aspect Ratio Display Mode Input Swap PIP Size Auto Adjust Volume No Function [Default] Power Save: OFF [Default] Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 9 of 49...
  • Page 10 [Default 50] Language Transparency [0-255] [Default 0] Rotate: 0 [Default 0] Border Width: [0-10] [Default 0] Border Color: R [Default] Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 10 of 49...
  • Page 11 EDID Setup : Reset We can offer custom option in OSD menu or firmware. Please contact your local support for information. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 11 of 49...
  • Page 12 426122210-3 (250mm) Reserved Hirose DF13-6P-1.25DSA or compatible Reserved Reserved Infra-red sensor connection JST 3-way, B3B-XH-A (Matching type : XHP-3) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 12 of 49...
  • Page 13 2-way Terminal Block 3.81mm pitch LINE_OUT Audio line out 3.5mm stereo jack Panel selection 8-way DIP Switch Function selection 6-way DIP Switch Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 13 of 49...
  • Page 14 USB port_3 LED indicator connection USB port_3 JP10 USB port_4 LED indicator connection USB port_4 JP11 Reserved Default 1-2 Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 14 of 49...
  • Page 15 JP12 Reserved Default 1-2 JP13 Reserved Default Open JP14 Reserved Default Open Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 15 of 49...
  • Page 16 CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP7, PP6, PP5 or PP2. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 16 of 49...
  • Page 17 JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA3, JA6 & JA5 Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 17 of 49...
  • Page 18 Panel display division 2 division 4 division 8 division OFF: 10-bit Output display bit mode ON: 8-bit Reserved Reserved Reserved Reserved Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 18 of 49...
  • Page 19 Ground CN13 - Audio line in: JST B4B-ZR (Matching type : ZHR-4) SYMBOL DESCRIPTION Ground LINE_IN_L Line in (Left) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 19 of 49...
  • Page 20 Panel power supply (+10V / 12V / 18V) (selected by JA3, JA5 & JA6) Ground Ground Ground Ground Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 20 of 49...
  • Page 21 VLCD_HV Panel power supply (+10V / 12V / 18V) VLCD_LV Panel power supply (3,3V/5V) VLCD_LV Panel power supply (3,3V/5V) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 21 of 49...
  • Page 22 Negative LVDS clock for A channel LVDS_OUT2_AC+ Positive LVDS clock for A channel Ground LVDS_OUT2_A3- Negative differential LVDS data bit A3 Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 22 of 49...
  • Page 23 V-by-One HS Data Lane 6 (45) Ground (44) VB1_TX5P V-by-One HS Data Lane 5 (43) VB1_TX5N V-by-One HS Data Lane 5 (42) Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 23 of 49...
  • Page 24 +12V Transmit data - Receive data + CMT1 Network use CMT1 Network use Receive data - CMT3 Network use Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 24 of 49...
  • Page 25 TMDS Data 5+ Digital Ground TMDS Clock+ /RXC TMDS Clock- Analog Red Analog Green Analog Blue HS_IN Analog horizontal sync Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 25 of 49...
  • Page 26 +12VDC / 24VDC in Ground PP6 – Alternate 12V/24VDC input power: 4-way PWR DIN Jack MDP-JRM-04 DESCRIPTION Ground External panel power Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 26 of 49...
  • Page 27 External panel power PP7 – Alternate 12V/24VDC input power: Terminal block ETB5302202002 DESCRIPTION External panel power Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 27 of 49...

  • Page 28: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 28 of 49...

  • Page 29: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 29 of 49...
  • Page 30 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 30 of 49...

  • Page 31: Troubleshooting

    : V-by-One LOCKN signal is set to LOW by panel when CDR (clock data recovery) training is done and CDR is locked. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 31 of 49...

  • Page 32: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer.  Re-layout and custom development services are available. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 32 of 49...

  • Page 33: Appendix I - Rs-232 Control Protocols And Command Set

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 33 of 49...
  • Page 34 VGA port) value/increment/decrement “?” Query Image H position 0x86, Set horizontal position = nn = 0x00~ 0x64 (0~100%) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 34 of 49...
  • Page 35 Single, PIP , PBP, 4P “r” | “R” | “1”- 2P PIP Reset, “?” “2”- 2P PBP (Left Right) Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 35 of 49...
  • Page 36 Select PIP window size = select nn | PIP window size value 0x00(smallest)~0x0A (largest) “r” | “R” | Reset Default: 0x0A “?” Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 36 of 49...
  • Page 37 | “+” | “-” | value/increment/decrement “r” | “R” | Reset Default: 0x80 “?” Query “m” Maximum query “n” Minimum query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 37 of 49...
  • Page 38 0xdd 0x46 Command “nnnn” vertical active Value dimension Query Video Wall 0xdd 0x47 Command “nnnn” horizontal bezel Value dimension Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 38 of 49...
  • Page 39 Unlock / Lock ”?” Query mount keys “0xee”, “0x6B”, Default Power Default power state after “0x50” supplying power to controller Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 39 of 49...
  • Page 40 SVX- 0x57 Write all panel timing parameters 4096-SDM later from SRAM into EEPROM “1”: Success “0”: Fail Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 40 of 49...
  • Page 41 Reset to use pre-defined EDID Reset instead of user EDID of selected return "1" Success port return "0" Fail Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 41 of 49...
  • Page 42 Reset all 0xcf Reset all parameters, including parameters user color temperature setting, for all video modes to default value Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 42 of 49...
  • Page 43 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 43 of 49...

  • Page 44: Appendix Ii - Mapping Definition

    Appendix II – Mapping definition Definition of division Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 44 of 49...
  • Page 45 Input data mapping Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 45 of 49...

  • Page 46: Appendix Iii - Dv Remote Control Unit Work For Svx-4096-Sdm

    Appendix III – DV remote control unit work for SVX-4096-SDM P/N 559000106-3 : DigitalView remote control unit (without DV logo silk screen printing) P/N 559000105-3 : DigitalView remote control unit (with DigitalView logo silk screen printing) BUTTON FUNCTION POWER BUTTON Soft power ON/OFF button.
  • Page 47 The manufacturer’s liability for damages to customer or others resulting from the use of any product supplied hereunder shall in no event exceed the purchase price of said product. TRADEMARKS The following are trademarks of Digital View Ltd:  Digital View ...

  • Page 48: Contact Details

    CONTACT DETAILS Digital View has offices in Asia, Europe and USA : Digital View Inc. 18440 Technology Drive Building 130 Morgan Hill, California, 95037 Tel: (1) 408-782 7773 Fax: (1) 408-782 7883 Sales: ussales@digitalview.com EUROPE Digital View Ltd. The Lake House...

  • Page 49: Revision History

    Revision History Date Rev No. Page Summary 13/09/2018 Draft Specifications subject to change without notice © Digital View Ltd – Ver 1.0 Sept 13, 2018 (SVX-4096-SDM_manual.doc) Page 49 of 49...

Table of Contents