Digital View SVX-4096-VW Instructions Manual
  1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. SVX-4096-VW
  6. Instructions manual

Digital View SVX-4096-VW Instructions Manual

Dvi, display port, hdmi interface controller for tft panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVI, DISPLAY PORT, HDMI INTERFACE CONTROLLER
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
5. Assembly notes – Important information about system elements
7. Connection & Operation – How to use the controller
13. Connectors, pinouts & jumpers – Essential connection information
27. Controller dimensions
28. Application notes
30. Troubleshooting
31. Specifications
32. Appendix I – Network connection
33. Appendix II – RS-232 control protocols and command set
44. Appendix III - Mapping definition
46. Appendix IV – DV remote control unit work for SVX-4096-VW
47. Appendix V – Functions list on browser page
50. Warranty, Caution & Limitation of Liability, Trademarks
51. Contact details
52. Revision History
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc)
FOR TFT PANEL
Model: SVX-4096-VW
Part number : 41762001X-3 or up
INSTRUCTIONS
Page 1 of 52

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SVX-4096-VW and is the answer not in the manual?

Questions and answers

Related Manuals for Digital View SVX-4096-VW

Summary of Contents for Digital View SVX-4096-VW

  • Page 1 33. Appendix II – RS-232 control protocols and command set 44. Appendix III - Mapping definition 46. Appendix IV – DV remote control unit work for SVX-4096-VW 47. Appendix V – Functions list on browser page 50. Warranty, Caution & Limitation of Liability, Trademarks 51.
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the SVX-4096-VW is a feature rich interface controller for :  TFT (active matrix) LCD panels of 4096x2160 resolutions in 60Hz with V-by-One interface.  TFT (active matrix) LCD panels of 1920x1080 resolution in 60Hz with LVDS interface.

  • Page 3: System Design

    SYSTEM DESIGN A typical LCD based display system utilizing this controller is likely to comprise the following: Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 3 of 52...
  • Page 4 Daisy Chain connection diagram: To use more SVX-4096-VW connected to each other, connect one end of the signal input cable (DP cable, LAN cable and IR cable) to the ‘OUT’ connector of SVX-4096-VW board and connect the other end to the ‘IN’ connector of next SVX-4096-VW board.

  • Page 5: Assembly Notes

    Panel cable: In order to provide a clean signal it is recommended that all panel cables (V-by-One signal and LVDS) supplied by Digital View. Care should be taken when placing the cables to avoid signal interference. Inverter/Backlight driver: This will be required for the backlight of an LCD, some LCD panels have an inverter/backlight driver built in.
  • Page 6 Refer to graphics modes table in specifications section for supported modes.  Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 6 of 52...

  • Page 7: Connection And Operation

    Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 7 of 52...
  • Page 8 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up Digital type Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 8 of 52...

  • Page 9: Pip Size

    5800 3200 sRGB User : R [0-255] G [0-255] B [0-255] Color Effect: Standard [Default] Game Movie Photo Vivid Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 9 of 52...
  • Page 10 Backlight Brightness Contrast Sharpness Saturation Aspect Ratio Display Mode Input Swap PIP Size Auto Adjust Volume No Function [Default] Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 10 of 52...
  • Page 11 [Default 0] Border Width: [0-10] [Default 0] Border Color: R [Default] Video Wall: IR ID Assign : [0-254] [Default 0] Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 11 of 52...
  • Page 12 Pin 22 : Low [Default] High Pin 23 : Low [Default] High Pin 24 : Low [Default] High EDID Setup : Reset Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 12 of 52...

  • Page 13: Connectors, Pinouts & Jumpers

    JAE FI-RE51S-HF (Matching type : FI-RE51HL) Ethernet RJ-45 connector LED1 Power LED connector JST 3-way, B3B-XH-A (Matching type : XHP-3) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 13 of 52...
  • Page 14 Config Menu button (for Ethernet Tact switch button function) Panel selection 8-way DIP Switch Function selection 6-way DIP Switch Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 14 of 52...
  • Page 15 JA15 is set to OPEN) Input power control Short = External switch control and fix the board ON Open = Switch mount control Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 15 of 52...
  • Page 16 ** Ensure that the backlight inverter supports 24V operation prior to connecting a 24VDC input. Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP5 or PP2. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 16 of 52...
  • Page 17 JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA3, JA6 & JA5 Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 17 of 52...
  • Page 18 Panel display division 2 division 4 division 8 division OFF: 10-bit Output display bit mode ON: 8-bit Reserved Reserved Reserved Reserved Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 18 of 52...
  • Page 19 Ground CN13 - Audio line in: JST B4B-ZR (Matching type : ZHR-4) SYMBOL DESCRIPTION Ground LINE_IN_L Line in (Left) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 19 of 52...
  • Page 20 BVR_B Backlight Brightness VR pin B (470 ohm resistor to +5V Vcc) Ground MENU OSD menu -/LEFT OSD -/Left Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 20 of 52...
  • Page 21 Positive differential LVDS data bit A3 LVDS_OUT1_A3- Negative differential LVDS data bit A3 Ground LVDS_OUT1_AC+ Positive LVDS clock for A channel Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 21 of 52...
  • Page 22 J5 – Panel power output connector: JS-1147A-08 Top 1.25mm (Matching type : JS-1146-08) SYMBOL DESCRIPTION PVLCD_Low (3,3V/5V) Panel power supply (3,3V/5V) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 22 of 52...
  • Page 23 Transmit data - Receive data + CMT1 Network use CMT1 Network use Receive data - CMT3 Network use CMT3 Network use Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 23 of 52...
  • Page 24 TMDS Data2 Shield DATA2- TMDS Data2– DATA1+ TMDS Data1+ DATA1S TMDS Data1 Shield DATA1- TMDS Data1– DATA0+ TMDS Data0+ Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 24 of 52...
  • Page 25 PP4 – External panel power input: Molex 43045-0400 or compatible (Matching type : Molex 43025-0400 or compatible) DESCRIPTION External panel power Ground External panel power Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 25 of 52...
  • Page 26 External panel power Ground External panel power PP7 – Alternate 12V/24VDC input power: Terminal block ETB5302202002 DESCRIPTION External panel power Ground Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 26 of 52...

  • Page 27: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 27 of 52...

  • Page 28: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 28 of 52...
  • Page 29 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 29 of 52...

  • Page 30: Troubleshooting

    : V-by-One LOCKN signal is set to LOW by panel when CDR (clock data recovery) training is done and CDR is locked. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 30 of 52...

  • Page 31: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer.  Re-layout and custom development services are available. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 31 of 52...

  • Page 32: Appendix I - Network Connection (Daisy Chain)

    Use the IP Locator utility available from the IP-60 web-page. http://www.digitalview.com/media/downloads/IPLocator.zip (Windows only)  Double click on the IP address in the IP Locator window, it will open the SVX-4096-VW browser page in your default browser. Alternatively copy the IP address into your browser address line. ...

  • Page 33: Appendix Ii - Rs-232 Control Protocols And Command Set

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 33 of 52...

  • Page 34: Picture

    VGA port) value/increment/decrement “?” Query Image H position 0x86, Set horizontal position = nn = 0x00~ 0x64 (0~100%) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 34 of 52...
  • Page 35 Single, PIP , PBP, 4P “r” | “R” | “1”- 2P PIP Reset, “?” “2”- 2P PBP (Left Right) Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 35 of 52...

  • Page 36: Pip Size

    Select PIP window size = select nn | PIP window size value 0x00(smallest)~0x0A (largest) “r” | “R” | Reset Default: 0x0A “?” Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 36 of 52...
  • Page 37 | “+” | “-” | value/increment/decrement “r” | “R” | Reset Default: 0x80 “?” Query “m” Maximum query “n” Minimum query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 37 of 52...
  • Page 38 0xdd 0x46 Command “nnnn” vertical active Value dimension Query Video Wall 0xdd 0x47 Command “nnnn” horizontal bezel Value dimension Query Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 38 of 52...
  • Page 39 Unlock / Lock ”?” Query mount keys “0xee”, “0x6B”, Default Power Default power state after “0x50” supplying power to controller Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 39 of 52...
  • Page 40 SVX- 0x57 Write all panel timing parameters 4096-VW later from SRAM into EEPROM “1”: Success “0”: Fail Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 40 of 52...
  • Page 41 Reset to use pre-defined EDID Reset instead of user EDID of selected return "1" Success port return "0" Fail Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 41 of 52...
  • Page 42 Reset all 0xcf Reset all parameters, including parameters user color temperature setting, for all video modes to default value Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 42 of 52...
  • Page 43 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 43 of 52...

  • Page 44: Appendix Iii - Mapping Definition

    Appendix III – Mapping definition Definition of division Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 44 of 52...
  • Page 45 Input data mapping Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 45 of 52...

  • Page 46: Appendix Iv - Dv Remote Control Unit Work For Svx-4096-Vw

    Appendix IV – DV remote control unit work for SVX-4096-VW P/N 559000106-3 : DigitalView remote control unit (without DV logo silk screen printing) P/N 559000105-3 : DigitalView remote control unit (with DigitalView logo silk screen printing) BUTTON FUNCTION POWER BUTTON Soft power ON/OFF button.

  • Page 47: Appendix V - Functions List On Browser Page

    Temperture Monitor (Int. Temp.) Temperture Monitor (Ext. Temp.) Power Monitor (PS 1) Power Monitor (PS 2) Light Monitor (Light1) Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 47 of 52...

  • Page 48: Picture

    User - Blue Level Color Temp. Value Color Effect Standard/Game/Movie/Photo/Vivid/User Gamma Off/1.8/2.0/2.2/2.4 Advanced Setting Aspect Ratio Full/16:9/4:3/5:4/1:1 Display Orientation Normal/Anti-Clockwise 90/Rotate 180/Anti-Clockwise 270 Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 48 of 52...

  • Page 49: Pip Size

    Reset All Parameters Reset all parameters to default value Reset Parameters Reset all parameters for all video mode to defualt value Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 49 of 52...

  • Page 50: Warranty

    TRADEMARKS The following are trademarks of Digital View Ltd:  Digital View  SVX-4096-VW Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 50 of 52...

  • Page 51: Contact Details

    6 How Ming St. Kwun Tong Hong Kong Tel: (852) 2861 3615 Fax: (852) 2520 2987 Sales: hksales@digitalview.com WEBSITE www.digitalview.com Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 51 of 52...

  • Page 52: Revision History

    Revision History Date Rev No. Page Summary 24 August 2017 First issued. Specifications subject to change without notice © Digital View Ltd – Ver 1.0 August 24, 2017 (SVX-4096-VW_manual.doc) Page 52 of 52...

Table of Contents