Digital View SVH-1920v2 Instructions Manual
  1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. SVH-1920v2
  6. Instructions manual

Digital View SVH-1920v2 Instructions Manual

Pc, dvi, video, hd component interface controller for tft panel
Hide thumbs Also See for SVH-1920v2:
Table of Contents

Advertisement

Quick Links

Download this manual
PC, DVI, VIDEO, HD Component INTERFACE CONTROLLER
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design - Diagram of a suggested system
4. Assembly notes - Important information about system elements
6. Connection & Operation - How to use the controller
13. Connectors, pinouts & jumpers - Essential connection information
32. Appendix I - Supported graphics modes table
54. Appendix VII - PIP mix table
58. Warranty, Caution & Limitation of Liability, Trademarks
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd - Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc)
FOR TFT PANEL
Model: SVH-1920v2
Part number : 41752004X-3 or up
INSTRUCTIONS
1 of 60
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SVH-1920v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital View SVH-1920v2

Summary of Contents for Digital View SVH-1920v2

  • Page 1: Table Of Contents

    60. Revision History It is essential that these instructions are read and understood before connecting or powering up this controller. Specifications subject to change without notice 1 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the SVH-1920v2 is a feature rich interface controller for : TFT (active matrix) LCD panels of 1920x1200, 1920x1080, 1920x480, 1600x1200, 1600x900, 1680x1050, 1440x900, 1366x768, 1280x1024, 1280x800, 1280x768 1024x768, 1024x600, 800x600, 800x480 and 640x480 resolutions.
  • Page 3 SYSTEM DESIGN A typical LCD based display system utilizing this controller is likely to comprise the following: Specifications subject to change without notice 3 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 4 17. Alternate composite 1 and S-video 1 input : Plug the video input cable P/N 426000500-3 on CNV1 connector 18. HD component video input : Plug the component video input cable P/N 426000600-3 on CNV2 connector Specifications subject to change without notice 4 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 5 • Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice 5 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 6 Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice 6 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 7 12V / 24VDC power input : Digital 10K Type OSD switch mount uses P/N 416100520-3 or up Digital type Specifications subject to change without notice 7 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 8 ** : FUNCTION IN ARGB/ DVI / VIDEO NTSC MODE ONLY ## : FUNCTION IN ARGB MODE ONLY ### : DISPLAY WHEN AUDIO ADD-ON BOARD CONNECTED Specifications subject to change without notice 8 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 9 OFF – Disable auto source select function - Setup4 4 4 4 Selection for the corresponding input sources detection VGA 1 Specifications subject to change without notice 9 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 10 OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5 Specifications subject to change without notice 10 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 11 Reset to Defaults : Resume to the default values User setting : Red Gain : Green Gain : Blue Gain : Specifications subject to change without notice 11 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 12 - buttons). Not support rotate mode when running with PIP mode or Component input. Firmware V1.27.00.00 or up Specifications subject to change without notice 12 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 13 (Matching video cable P/N 426000800-3) S-Video 1&2) S-video 1 in Mini din 4-way Composite video 1 in BNC connector Specifications subject to change without notice 13 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 14 5-6 closed = Display "Red/Green/Blue only selection under Monochrome mode on OSD menu Input power control Short = External switch control Specifications subject to change without notice 14 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 15 Close = composite video 2 input is terminated with 75Ω Panel & function selection See table 2 Panel & function selection See table 3 Specifications subject to change without notice 15 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 16 Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP2/PP3 or PP5. Specifications subject to change without notice 16 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 17 * Maximum current for 3.3V, 5V = 7A, Maximum current for 12V = 5A, Maximum current for 18V = 3.5A Specifications subject to change without notice 17 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 18 JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA6 & JA5 Specifications subject to change without notice 18 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 19 OFF – Enable : The output refresh rate locks to the input for 50Hz / 60Hz mode (other resolution lock the output be 60Hz. ) Specifications subject to change without notice 19 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 20 1920x1200. * This function is only effective on V1.26.00.00 or later firmware revision. Specifications subject to change without notice 20 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 21 CN11 – SPDIF audio output connector : JST B3B-PH-K (Matching type : PHR-3) SYMBOL DESCRIPTION SPDIF SPDIF Digital audio output Ground Specifications subject to change without notice 21 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 22 Luma in / Green in Ground A_Pb1 Pb in / Blue in Ground A_Pr1 Pr in / Red in Ground Specifications subject to change without notice 22 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 23 Negative LVDS clock for A channel Ground LVDS_OUT1_A2+ Positive differential LVDS data bit A2 LVDS_OUT1_A2- Negative differential LVDS data bit A2 Specifications subject to change without notice 23 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 24 No connection No connection HDSDI_LOCK (control pin) HDSDI_LOCK (control pin) No connection Ground Ground No connection No connection Specifications subject to change without notice 24 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 25 AGND Analog ground green AGND Analog ground blue DDC_5V +5V power supply for DDC (optional) DGND Digital ground Specifications subject to change without notice 25 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 26 External panel power Ground External panel power Ground PP5 – 12V/24VDC input power supply DESCRIPTION +12V / +24VDC Ground Specifications subject to change without notice 26 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 27: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice 27 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 28: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice 28 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 29 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice 29 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 30: Troubleshooting

    Generally after common sense issues have been resolved we recommend step by step substitution of known working parts to isolate the problem. Specifications subject to change without notice 30 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 31: Specifications

    For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer. Re-layout and custom development services are available. • Specifications subject to change without notice 31 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 32 X_70 1024x768 75.000 56.476 70.069 Digital Separate Sync 70Hz X_70 1024x768 75.000 56.476 70.069 Sync On Green 70Hz Specifications subject to change without notice 32 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 33 60Hz vertical refresh rate. To support on higher refresh rate over 60Hz, the LCD panel may not support. Specifications subject to change without notice 33 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 34 [KHz] [Hz] NTSC 720x480i 15.7 NTSC 4.43 720x480i 15.7 720x576i 15.6 PAL M 720x576i 15.6 SECAM 720x576i 15.6 Specifications subject to change without notice 34 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 35: Appendix Ii - Rs-232 Control Protocols

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice 35 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 36 “r” | “R” | Reset Default : “0””C” “?” Query Frequency 0x8b, Set frequency = Graphic mode H active size (in Specifications subject to change without notice 36 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 37 “0”- Single “r” | “R” | Reset, “1”- Picture in Picture (PIP) “?” Query “2”- Picture by Picture (PBP) Specifications subject to change without notice 37 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 38 PIP off if “nn” = “0””0” “r” | “R” | Reset “0””0” ~ “1””2” “?” Query “1””9” : Size by Size Specifications subject to change without notice 38 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 39 | “+” | “-” | value/increment/decrement “r” | “R” | Reset Range : “9””C”-“F””F” “?” Query Default : “E””3” for 8000K Specifications subject to change without notice 39 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 40 “0” – Backlight Off “0” | “1” | /Status “1” – Backlight On.(Default) “R” | “r” “?” – Backlight On/Off Query Specifications subject to change without notice 40 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 41 Blue Offset for selected colour selected colour channel for the selected colour temperature. temperature nn | “+” | “-” | temp. = Specifications subject to change without notice 41 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 42 Run Anti image retention Method “0” | Horizontal Pan “1”| Vertical Pan “2”| Flash “3” Pixel Shift Anti image “0xee”, “0x6C” Specifications subject to change without notice 42 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 43 BIOS version “VV.YY.ZZ” version VV = V0 or E0, V0 = Release version E0 = Engineering Sample YY= Version Number Specifications subject to change without notice 43 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 44 Clear Line 1 RS232 Code: “0xF0 0x43 0x30 0x31” Return Code: “0xF0 0x43 0x30 0x31 0x30 0x31” Specifications subject to change without notice 44 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 45 “1” Turn On Text Overlay On or Off “N” Disable ---------------------- Background Return “n” “N” = “0x30~0x31” “0” Turn Off Text Overlay Specifications subject to change without notice 45 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 46 Return Code: “0xF0 0x51 0x31 0x31” Please set the "Background Transparency” and "Left offset" commands before the "Send Line" command. Specifications subject to change without notice 46 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 47 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice 47 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 48: Appendix Iii - Mapping Definition

    Appendix III – Mapping definition • Definition of Mapping A : Specifications subject to change without notice 48 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 49 • Definition of Mapping B : Specifications subject to change without notice 49 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 50 • Definition of VESA : Specifications subject to change without notice 50 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 51 • Definition of JEIDA : Specifications subject to change without notice 51 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 52: Appendix Iv - Auto Color Gain

    Gain function can be used. This function will reset the stored RGB values to a set of approximate values. Specifications subject to change without notice 52 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 53: Appendix V - Dv Remote Control Unit Work For Svh-1920V2

    Press this button in the non OSD menu display mode to select VGA source. DVI BUTTON Press this button in the non OSD menu display mode to select DVI source. Specifications subject to change without notice 53 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 54 S-Video 2 (CNV5) HD-Component 1 (CNV2) HD-SDI 1** HD-SDI 2 ** - via HD-1000/HD-2000 ## - via HD-2000 Specifications subject to change without notice 54 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 55: Appendix Vii - Hd-1000 / Hd-2000 Connection

    Appendix VII – HD-1000 / HD-2000 connection SVH-1920v2 & HD-1000 / HD-2000 connection : Specifications subject to change without notice 55 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 56: Appendix Viii - Procedure For Showing How To Select The Baud Rate

    Step 4 : Select “Set RS232 Baud Rate(CN8)” setting, then press “+” to enter the sub menu page. Specifications subject to change without notice 56 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 57 57600 / 115200). Step 5 : Press “MENU” key to return previous menu. Step 6 : Shut off the controller Specifications subject to change without notice 57 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...
  • Page 58 TRADEMARKS The following are trademarks of Digital View Ltd: Digital View • SVH-1920v2 • Specifications subject to change without notice 58 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 59: Contact Details

    6 How Ming Street Kwun Tong Hong Kong Tel: (852) 2861 3615 Fax: (852) 2520 2987 Sales: hksales@digitalview.com WEBSITE www.digitalview.com Specifications subject to change without notice 59 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

  • Page 60: Revision History

    V1.26.00.00 firmware. - Support "Resolution default by EDID" for different resolution panel. Specifications subject to change without notice 60 of 60 © Digital View Ltd – Doc Ver 6.00: 22 Nov, 2018 (SVH-1920v2-4x_manual.doc) Page...

Table of Contents