1. Manuals
  2. Brands
  3. Digital View Manuals
  4. Controller
  5. HX-4096
  6. Instructions manual

Digital View HX-4096 Instructions Manual

Dvi, display port, hdmi, video interface controller for tft panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVI, DISPLAY PORT, HDMI, VIDEO INTERFACE CONTROLLER
CONTENTS
Page: 2. Introduction, How to Proceed, Usage Note, Disclaimer
3. System design – Diagram of a suggested system
5. Assembly notes – Important information about system elements
7. Connection & Operation – How to use the controller
13. Connectors, pinouts & jumpers – Essential connection information
30. Controller dimensions
31. Application notes
33. Troubleshooting
34. Specifications
36. Appendix I – Signal support modes table
40. Appendix II – Network connection
43. Appendix III – RS-232 control protocols and command set
53. Appendix IV - Mapping definition
55. Appendix V – DV remote control unit work for HX-4096
56. Appendix VI - PIP mix table
57. Appendix VII – Functions list on browser page
60. Warranty, Caution & Limitation of Liability, Trademarks
61. Contact details
62. Revision History
It is essential that these instructions are read and understood before connecting or
powering up this controller.
Specifications subject to change without notice
© Digital View Ltd – Ver 2.3
FOR TFT PANEL
Model: HX-4096
Part number : 41755012X-3 or up
INSTRUCTIONS
23 May, 2023 (HX-4096_manual.doc)
Page 1 of 62

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HX-4096 and is the answer not in the manual?

Questions and answers

Related Manuals for Digital View HX-4096

Summary of Contents for Digital View HX-4096

  • Page 1 43. Appendix III – RS-232 control protocols and command set 53. Appendix IV - Mapping definition 55. Appendix V – DV remote control unit work for HX-4096 56. Appendix VI - PIP mix table 57. Appendix VII – Functions list on browser page 60.
  • Page 2 Introduction Designed for LCD monitor and other flat panel display applications, the HX-4096 is a feature rich interface controller for :  TFT (active matrix) LCD panels of 4096x2160 resolutions in 60Hz with V-by-One, eDP or LVDS interface.  Support true 10 bits panel Support HDMI, DVI and Display Port input.

  • Page 3: System Design

    SYSTEM DESIGN A typical LCD based display system utilizing this controller is likely to comprise the following: Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 3 of 62...
  • Page 4 Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 4 of 62...

  • Page 5: Assembly Notes

    Panel cable: In order to provide a clean signal it is recommended that all panel cables (V-by-One signal, eDP and LVDS) supplied by Digital View. Care should be taken when placing the cables to avoid signal interference. Inverter/Backlight driver: This will be required for the backlight of an LCD, some LCD panels have an inverter/backlight driver built in.
  • Page 6 Refer to graphics modes table in specifications section for supported modes.  Non-interlaced & interlaced video input is acceptable. IMPORTANT: Please read the Application Notes section for more information. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 6 of 62...

  • Page 7: Connection And Operation

    Once the system has been connected and switched on there are a number of functions available to adjust the display image as summarized in the following sections. The settings chosen will be saved for each mode independently. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 7 of 62...
  • Page 8 Digital type * Sequence of Input source selection (Press "+" Button to change source, Press "SEL DN" to confirm) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 8 of 62...
  • Page 9 5800 3200 sRGB User : R [0-255] G [0-255] B [0-255] Color Effect: Standard [Default] Game Movie Photo Vivid Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 9 of 62...
  • Page 10 Backlight Brightness Contrast Sharpness Saturation Aspect Ratio Display Mode Input Swap PIP Size Auto Adjust Volume No Function [Default] Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 10 of 62...
  • Page 11 [Default 50] Language Transparency [0-255] [Default 0] Rotate: 0 [Default 0] Border Width: [0-10] [Default 0] Border Color: R [Default] Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 11 of 62...
  • Page 12 Pin 22 : Low [Default] High Pin 23 : Low [Default] High Pin 24 : Low [Default] High EDID Setup : Reset Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 12 of 62...

  • Page 13: Connectors, Pinouts & Jumpers

    Hirose DF13A-12P-1.25H (Mating type : DF13-12S-1.25C) (Matching OSD switch mount cable P/N 426122200-3 (150mm) or 426122210-3 (250mm) Reserved Reserved Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 13 of 62...
  • Page 14 Config Menu button (for Ethernet Tact switch button function) Panel selection 8-way DIP Switch Function selection 6-way DIP Switch Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 14 of 62...
  • Page 15 JA15 is set to OPEN) Input power control Short = External switch control and fix the board ON Open = Switch mount control Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 15 of 62...
  • Page 16 ** Ensure that the backlight inverter supports 24V operation prior to connecting a 24VDC input. Because CNA1 pin 1 and CNB1 pin 2 will output 24VDC if input 24VDC via PP5 or PP2. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 16 of 62...
  • Page 17 JA3, JA5 & JA6 location on board : (Please pay attention to the jumper settings on JA3, JA5 & JA6 which are red in color) JA3, JA6 & JA5 Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 17 of 62...
  • Page 18 ON: Determine by OSD menu Note: For setting definition, please refer to V-by-One's pin#15 to pin#24 of panel specification. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 18 of 62...
  • Page 19 2. The panel model without marked with (*) means the model has not been tested and verified but have a suggested connection diagram provide. 3. For the 4K 120Hz panel connection, IE-2000 is required. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 19 of 62...
  • Page 20 CN6 – Light sensor connector : DF13 2-ways (Matching type : DF13-2S-1.25C) SYMBOL DESCRIPTION SENSOR Light sensor input +3.3V Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 20 of 62...
  • Page 21 CN15 – Power connector for IE-2000: Yeonho SMH200-04 (Matching type: SMH200-04) SYMBOL DESCRIPTION 12/24VA +12/24 VDC 12/24VA +12/24 VDC Ground Ground Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 21 of 62...
  • Page 22 MENU OSD menu -/LEFT OSD -/Left +/RIGHT OSD +/Right SEL_DN OSD Select down SEL_UP OSD Select up No connection Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 22 of 62...
  • Page 23 Negative differential LVDS data bit A1 LVDS_OUT3_A0+ Positive differential LVDS data bit A0 LVDS_OUT3_A0- Negative differential LVDS data bit A0 Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 23 of 62...
  • Page 24 Negative differential LVDS data bit B1 LVDS_OUT1_B0+ Positive differential LVDS data bit B0 LVDS_OUT1_B0- Negative differential LVDS data bit B0 Ground Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 24 of 62...
  • Page 25 Panel power selected by JA15 DP_TX_33V Power for connector (3.3V 500mA) Ground DPTX_HPD Hot Plug Detect DPTX_AUX_N Auxiliary Channel (negative) Ground Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 25 of 62...
  • Page 26 Panel power supply (selected by JA15 & JP2) PVLCD_High Panel power supply (selected by JA15 & JP2) (1) - (51): Pin# read on panel side. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 26 of 62...
  • Page 27 TMDS Clock– No connection No connection SCL (I²C Serial Clock for DDC) SDA (I²C Serial Data Line for DDC) Ground Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 27 of 62...
  • Page 28 AUX CH (n) Auxiliary Channel (negative) Hot Plug Hot Plug Detect Ground DP_PWR Power for connector (3.3 V 500 mA) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 28 of 62...
  • Page 29 PP4 – External panel power input: Molex 43045-0400 or compatible (Matching type : Molex 43025-0400 or compatible) DESCRIPTION External panel power Ground External panel power Ground Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 29 of 62...

  • Page 30: Controller Dimensions

    CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the inverter. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 30 of 62...

  • Page 31: Application Notes

    This can then be matched with function controls connected to CNC1 pins 4 & 3 or 5: see table. CNC1 DESCRIPTION VR A VR WIP VR B Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 31 of 62...
  • Page 32 3.6 V 10 K 4.8 V So this circuit could provide Brightness adjust voltage ranging from 0V to 5V. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 32 of 62...

  • Page 33: Troubleshooting

    : V-by-One's LOCKN signal is set LOW by panel when CDR (clock data recovery) taining is done and CDR is locked.  : No V-by-One's signal is detected and locked. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 33 of 62...

  • Page 34: Specifications

    512KB Flash (Program data) 12KB Flash (Parameters settings) 16Mb Flash (System program) 2Mb Flash (Web page data) 512KB EEPROM (System settings) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 34 of 62...
  • Page 35 For specific panel setup a sample of an LCD may be required (this will be returned) and a copy of the full technical specifications for the panel from the manufacturer.  Re-layout and custom development services are available. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 35 of 62...

  • Page 36: Appendix I - Signal Support Mode Table

    1280x1024 75Hz 1360x768 60Hz 1366x768 60Hz 1440x900 75Hz 1600x1200 75Hz 1680x1050 75Hz 1920x1080 60Hz 1920x1200 60Hz 2560x1600 60Hz 3840x2160 30Hz Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 36 of 62...
  • Page 37 1280x1024 75Hz 1360x768 60Hz 1366x768 60Hz 1440x900 75Hz 1600x1200 75Hz 1680x1050 75Hz 1920x1080 60Hz 1920x1200 60Hz 2560x1600 60Hz 3840x2160 30Hz Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 37 of 62...
  • Page 38 1366x768 60Hz 1440x900 75Hz 1600x1200 75Hz 1680x1050 75Hz 1920x1080 60Hz 1920x1200 60Hz 2560x1600 60Hz 3840x2160 30Hz 3840x2160 60Hz 4096x2160 60Hz Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 38 of 62...
  • Page 39 1440x900 60Hz 1600x900 60Hz 1600x1200 60Hz 1680x1050 60Hz 1920x1080 60Hz 1920x1200 60Hz 2560x1600 60Hz 3840x2160 30Hz 3840x2160 60Hz 4096x2160 60Hz Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 39 of 62...

  • Page 40: Appendix Ii - Network Connection

    Appendix II – Network connection The HX-4096 LCD interface controller has an RJ-45 Ethernet port for control and monitoring over a network. This application note introduces the two user interface modes:  Command line direct mode  Browser based web server mode Before enter the above modes, make sure the Network option has been enabled in OSD menu settings.
  • Page 41 [Soft power on] 81 36 34 [Adjust brightness to max. value] 98 50 31 [Jump to Display Port input] Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 41 of 62...
  • Page 42 Use the IP Locator utility available from the IP-60 web-page. http://www.digitalview.com/media/downloads/IPLocator.zip (Windows only)  Double click on the IP address in the IP Locator window, it will open the HX-4096 browser page in your default browser. Alternatively copy the IP address into your browser address line. ...

  • Page 43: Appendix Iii - Rs-232 Control Protocols And Command Set

    The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport, Telix or Serial Utility program developed by DigitalView. Please contact your local support for information. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 43 of 62...
  • Page 44 | “+” | “-” | value/increment/decrement “?” Query Image H position 0x86, Set horizontal position = nn = 0x00~ 0x64 (0~100%) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 44 of 62...
  • Page 45 Set auto source seek = “0” | “1” | Disable/Enable “r” | “R” | Reset Default: “1” (Enable) “?” Query Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 45 of 62...
  • Page 46 Select PIP window size = select nn | PIP window size value 0x00(smallest)~0x0A (largest) “r” | “R” | Reset Default: 0x0A Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 46 of 62...
  • Page 47 = nn | “+” | “-” | value/increment/decrement “r” | “R” | Reset Default: 0x80 Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 47 of 62...
  • Page 48 “?” Reset 120Hz : “0”,”7”,”8” Query 140Hz : “0”,”8”,”C” 160Hz : “0”,”A”,”0” (Default) 180Hz : “0”,”B”,”4”’ 200Hz : “0”,”C”,”8” Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 48 of 62...
  • Page 49 ''0'' | ''1'' Pin logic level Panel timing ''0xee'', ''0x74'', Panel timing setting Set panel timing to SRAM of HX-4096. setting If cmd 2 parameter is n = 0x3F, it dumps the values of SRAM Please note “n” is BCD decimal value in ASCII.
  • Page 50 Reset to use pre-defined EDID Reset instead of user EDID of selected return "1" Success port return "0" Fail Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 50 of 62...
  • Page 51 Reset all parameters, including “1” - successful. parameters user color temperature setting, for all video modes to default value Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 51 of 62...
  • Page 52 0x71 0x52 0x72 0x53 0x73 0x54 0x74 0x55 0x75 0x56 0x76 0x57 0x77 0x58 0x78 0x59 0x79 0x5A 0x7A Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 52 of 62...

  • Page 53: Appendix Iv - Mapping Definition

    Appendix IV – Mapping definition Definition of division Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 53 of 62...
  • Page 54 Input data mapping Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 54 of 62...

  • Page 55: Appendix V - Dv Remote Control Unit Work For Hx-4096

    Appendix V – DV remote control unit work for HX-4096 P/N 559000106-3 : DigitalView remote control unit (without DV logo silk screen printing) P/N 559000105-3 : DigitalView remote control unit (with DigitalView logo silk screen printing) BUTTON FUNCTION POWER BUTTON Soft power ON/OFF button.

  • Page 56: Appendix Vi - Pip Mix Table

    DisplayPort (P5) PIP \ MAIN (P1/CN2) (P2/CN16) (P3/CN5) (P4) DVI (P1/CN2) HDMI (P2/CN16) HDMI (P3/CN5) HDMI (P4) DisplayPort (P5) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 56 of 62...

  • Page 57: Appendix Vii - Functions List On Browser Page

    Temperture Monitor (Int. Temp.) Temperture Monitor (Ext. Temp.) Power Monitor (PS 1) Power Monitor (PS 2) Light Monitor (Light1) Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 57 of 62...
  • Page 58 User - Blue Level Color Temp. Value Color Effect Standard/Game/Movie/Photo/Vivid/User Gamma Off/1.8/2.0/2.2/2.4 Advanced Setting Aspect Ratio Full/16:9/4:3/5:4/1:1 Display Orientation Normal/Anti-Clockwise 90/Rotate 180/Anti-Clockwise 270 Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 58 of 62...
  • Page 59 Reset All Parameters Reset all parameters to default value Reset Parameters Reset all parameters for all video mode to defualt value Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 59 of 62...

  • Page 60: Warranty

    The manufacturer’s liability for damages to customer or others resulting from the use of any product supplied hereunder shall in no event exceed the purchase price of said product. TRADEMARKS The following are trademarks of Digital View Ltd:  Digital View ...

  • Page 61: Contact Details

    CONTACT DETAILS Digital View has offices in Asia, Europe and USA : Digital View Inc. 18440 Technology Drive Building 130 Morgan Hill, California, 95037 Tel: (1) 408-782 7773 Fax: (1) 408-782 7883 Sales: ussales@digitalview.com EUROPE Digital View Ltd. The Lake House...

  • Page 62: Revision History

    33, 40-42 LED definition, Use of Network connection 23 May 2023 Revised P5 (Display Port input) connector pin assignment. Specifications subject to change without notice © Digital View Ltd – Ver 2.3 23 May, 2023 (HX-4096_manual.doc) Page 62 of 62...

Table of Contents