Features - Sony BRC-H800 Operating Instructions Manual

Features

Pan/Tilt/Zoom CMOS video camera
equipped with a small built-in pan-tilt
head
• The camera unit is equipped with a 1.0-type Exmor R
sensor and an optical 12× zoom lens with pan/tilt/zoom features
integrated into a small built-in pan-tilt head. This versatile
camera can be used for various applications.
• The pan-tilt head can pan to the right or left by ±170 degrees
and tilt upward to 90 degrees and downward to 30 degrees,
which allows the camera to remotely shoot wide areas.
• The camera pans and tilts smoothly, even at low movement
speed.
• The camera pans and tilts quietly, even at its maximum speed of
60 degrees per second.
• Up to 100 preset positions can be saved. The PTZ Motion Sync
function enables smooth preset operation with coordinated pan/
tilt and zoom. In addition, the speed of movement between
positions can be adjusted from an optional RM-IP500/IP10
Remote Controller.
Zoom performance for capturing distant
subjects
In addition to 12× optical zoom, it uses Sony's 2×
Clear Image Zoom function and 2× Tele Convert
*2
mode to achieve the equivalent of up to 48×
telephoto performance.
*1
When shooting at 1920×1080 only. 1.5× when
shooting at 3840×2160.
*2
When shooting at 1920×1080 only.
High sensitivity and high resolution from
built-in 1.0-type CMOS image sensor
With the built-in highly photosensitive 1.0-type Exmor
®
R CMOS sensor, high resolution shooting with less
noise can be achieved. Highly sensitive shooting unique
to the large sensor can be achieved. In addition, the
camera is equipped with a ZEISS Vario-Sonnar T* built-
in lens.
Multi-format support
*1
3840×2160/29.97p (2SI)
1920×1080/59.94p, 1920×1080/59.94i,
1280×720/59.94p
*1
3840×2160/25p (2SI)
1920×1080/50p, 1920×1080/50i, 1280×720/50p
*1
3840×2160/23.98p(2SI)
Switching possible with the SYSTEM SELECT switch
*1
Compatible only with the BRC-X1000
®
CMOS
*1
*2
, 1920×1080/23.98p
Equipped with PoE+ (Power Over
Ethernet Plus)
The camera is compatible with PoE+ (Power Over
Ethernet Plus), so a single LAN cable can be used for
power provision and control.
Compatible with VISCA over IP protocol
An IP connection can be established between the camera
and the remote controller.
Equipped with External Video Sync
Function
The camera is equipped with an external video sync
function to synchronize the camera images on multiple
cameras.
Equipped with Tally Lamp Function
The camera is equipped with a Tally lamp that quickly
distinguishes when the camera is in use.
The front Tally lamp is a large Tally lamp used for
improving visibility. The camera is also equipped with a
Tally lamp behind the camera block, in order to improve
visibility from the rear side.
Supports network connection with RCP/
MSU
Network connection to an optional remote control panel
(RCP) or master setup unit (MSU) is supported.
Picture Profile preset function
Picture Profile presets PP1 to PP6 can be loaded. By
using these presets, you can match the image texture
with other types of camcorders that support the Picture
Profile function, or create an image texture that is
similar to that of cinematic film.
Built-in ND filter
The camera is equipped with a built-in ND filter to
enable adjustment of the light level in bright lighting
conditions without changing the shutter speed or iris.
You can choose from Off, 1/4, 1/16, and 1/64.
Supports output of tracking data
Tracking information of the pan/tilt/zoom, focus, and
iris is output in sync with the sync signal.
The data output complies with the industry standard
free-d protocol for integration with various VR/AR
systems.
6