Externally Synchronizing A Single Camera - Sony BRC-H800 Operating Instructions Manual

Externally synchronizing a single
camera
IR SELECT CAMERA SETUP
1 2 3
1 2 3 4 5 6 7 8
SYSTEM
IN VISCA RS - 422 OUT LAN
SELECT
OSD
ON OFF
HDMI OUT MONITOR OUT LINE OUT
SDI 1 SDI 2 SDI 1 SDI 2
Synchronizing signal generator
External synchronization
Multiple cameras can be synchronized to a specific
reference signal.
Providing a reference signal to the EXT SYNC IN
terminal (page 10) allows the camera to be synchronized
in phase with the video signal. Depending on the system
frequency, the compatible reference signal varies.
System select Compatible reference signals
0: 3840×2160/29.97p 1920×1080/59.94i
1: 1920×1080/59.94p 720×486/59.94i (NTSC)
2: 1920×1080/59.94i
4,7: 1280×720/59.94p 1920×1080/59.94i
1280×720/59.94p
720×486/59.94i (NTSC)
8: 3840×2160/25p 1920×1080/50i
9: 1920×1080/50p 720×576/50i (PAL)
A:1920×1080/50i
C:1280×720/50p 1920×1080/50i
1280×720/50p
720×576/50i (PAL)
E: 3840×2160/23.98p 1920×1080/47.95i (23.98PsF)
F: 1920×1080/23.98p
Notes
• When the reference signal is unstable, the camera
cannot be externally synchronized.
• Sub-carriers cannot be synchronized.
12V
EXT SYNC IN
TERMI-
NATION
TERMINATION
ON OFF
switch: On
Connecting cable with
BNC connector
(commercially available)
To SYNC OUT terminal
28