Network Menu; Picture Profile Menu - Sony BRC-H800 Operating Instructions Manual

NETWORK Menu

The NETWORK menu is used to configure Network
settings.
IPv4 ADDRESS: Displays the IP address set up on the
camera.
SUBNET MASK: Displays the subnet mask currently
set up for the camera.
GATEWAY: Displays the default gateway address
currently set up for the camera.
MAC ADDRESS: Displays the MAC address of the
camera.
NAME: Displays the name currently set up for the
camera.
Note
You should set up the IP address, subnet mask, and
default gateway before you first use the Network
features. Configure these settings using the setup
application "RM-IP Setup Tool" or "RM-IP10 Setup
Tool" on your PC.
For details on the settings, refer to "RM-IP Setup Tool
Guide" or "RM-IP10 Setup Tool Guide."
PICTURE PROFILE
Menu
PROFILE NUMBER
Selects the Picture Profile number.
The camera is equipped with six types of Picture
Profiles.
You can match the image texture with other types of
camcorders that support the Picture Profile function, or
create an image texture that is similar to that of
cinematic film.
PP1: Set to image quality that uses [MOVIE] gamma.
PP2: Set to image quality that uses [STILL] gamma.
PP3: Set to image quality that uses [ITU709] gamma for
natural color tones.
PP4: Set to image quality for ITU-709 standard color
tones.
PP5: Set to image quality that uses [CINE1] gamma.
PP6: Set to image quality that uses [CINE2] gamma.
RECALL: Recall the selected Picture Profile.
The following settings are changed when PP1 to
PP6 are recalled.
• GAMMA/VISIBILITY ENHANCER
SELECT,
GAMMA OFFSET,
GAMMA LEVEL,
BLACK GAMMA,
BLACK GAMMA RANGE,
BLACK LEVEL,
VE SETTING
• KNEE
SETTING,
KNEE MODE
• COLOR
MATRIX,
SELECT,
42