Exposure Menu - Sony BRC-H800 Operating Instructions Manual

3
Press the HOME button.
The selected menu is displayed.
4
Use the V or v button to move the cursor to
the setting item you want to change.
5
Use the B or b button to change the set
value.
Note
You cannot turn off IR RECEIVE in the SYSTEM menu
with the supplied remote commander. To turn off IR
RECEIVE, use the remote controller (not supplied) or
VISCA command.
To go back to the Main menu
Press the DATA SCREEN button.
To close the menu
When the main menu is displayed, press the DATA
SCREEN button once. When a setting menu is
displayed, press the DATA SCREEN button twice.

EXPOSURE Menu

The EXPOSURE menu is used to set the items regarding
the exposure.
MODE (Exposure mode)
FULL AUTO: The exposure is adjusted automatically
using the sensitivity, electronic shutter speed, and
aperture setting.
MANUAL: You can manually adjust the sensitivity,
electronic shutter speed, and aperture setting
individually.
SHUTTER Pri: You can adjust the electronic shutter
speed manually. Automatically adjusts the
exposure using the gain and iris.
IRIS Pri: You can adjust the aperture setting manually.
Automatically adjusts the exposure using the gain
and electronic shutter speed.
GAIN Pri: You can adjust the sensitivity manually.
Automatically adjusts the exposure using the
electronic shutter speed and iris.
When you select any of the above modes, you will see
available options for the selected mode among the
following setting items.
GAIN: Select the gain.
When EXPOSURE MODE is either MANUAL
or GAIN Pri, you can choose a value from –3 to
33 dB in 3 dB increments.
SPEED: When EXPOSURE MODE is either
MANUAL or SHUTTER Pri, select the
electronic shutter speed.
When the signal format is 2160/29.97p
(the BRC-X1000 only), 1080/59.94p, 1080/
59.94i, or 720/59.94p
You can choose from 1/8, 1/15, 1/30, 1/50, 1/60,
1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500,
31