Accessing From A Web Browser; Before Starting The Operation; Setting-Up The Pc; Accessing The Camera From A Web Browser - Sony BRC-H800 Operating Instructions Manual

Accessing from a Web Browser

You can access the camera from a web browser on a PC
to upgrade the firmware and to change settings.
An IP address must be set on the camera to access it
from a web browser. For details on IP settings, refer to
"RM-IP Setup Tool Guide" or "RM-IP10 Setup Tool
Guide."
Before starting the
operation

Setting-up the PC

One of the following system configurations is required
for the PC:
OS
Windows 8.1 Pro (32-bit version, 64-bit version)
Windows 10 Pro (32-bit version, 64-bit version)
Web browser
Windows Internet Explorer Ver. 11.0
Notes
• In the case of Windows 8.1, use the Internet Explorer
desktop user interface (desktop UI) version.
• Turn off tablet mode when using Windows 10.
• Every page is optimized for Internet Explorer in
Medium font size.
• The web page displayed when you log in to the camera
is made using JavaScript. The web page may not
display correctly if your computer uses certain
software, such as anti-virus software.
Accessing the camera from a web
browser
Start a web browser on the computer and type the IP
address of the camera in the address bar.
A user ID and password authentication is required to
access the camera. The user ID and factory-set password
of the camera are as follows:
User name: admin
Password: Admin_1234
Note
The password change screen is displayed when the
camera is accessed using the factory-set password. You
can view other tabs after changing the password.
50