Advertisement
E. The RECOVERY key
1.
If no PULSE input is available, press The RECOVERY key to disable the function.
2.
Press this KEY once after the PULSE value is displayed;
•
The TIME and PULSE functions of RECOVERY are enabled, while the
remaining functions are enabled and not displayed (See Figure 9).
•
The TIME window displays "0:60" seconds and begins the countdown (the
countdown does not affect the TIME when PULSE is automatically shut down
without input), the PULSE window displays the actual heartbeat and when
countdown to zero, "FX" is displayed (Figure 26, X value 1~6) and "Beep" and in
the big 8 area, the heartbeat value will be displayed continuously. Then press
RECOVERY to jump to normal Display (motor returns to zero and moves
LEVEL 1, waiting for each setting).
3.
After "FX" is displayed, press this KEY to restore general display. If this KEY is
pressed again, it will be executed from the first item (As shown in Figure 10).
4.
During the
key.
Heart rate sensing
This product is compatible with Polar wireless heart rate monitors, and other 5.3kHz wireless
heart rate monitors. The PULSE meter will automatically show the heart rate reading when
a wireless monitor is detected.
There is no heart rate sensor built into the product's handlebars.
RECOVERY
period, the RECOVERY can be restored by pressing this
Figure 9
Figure 10
Advertisement
