Hand-held Reader Writer Functions
Auto Commands
Host computer
1, 2, 3...
Button Auto Commands
Host computer
1, 2, 3...
14
Auto commands are able to conduct communications with the Data Carrier
when the antenna is placed near the front of the Data Carrier after a command is
received from the host device.
Hand-held Reader Writer
1.
Command
4.
Response
1. A command is sent from the host device to the Hand-held Reader Writer.
2. The Hand-held Reader Writer enters the communication stand-by state with
the Data Carrier, and the operation indicator (LED) is lit green.
3. Communication with the Data Carrier is performed when the Hand-held
Reader Writer antenna is placed near the Data Carrier.
4. A response is given from the Hand-held Reader Writer to the host device.
The operation indicator (LED) is not lit.
Button auto commands issue auto commands after a command is sent from the
host device and the activate switch of the Hand-held Reader Writer is pressed.
Hand-held Reader Writer
2.
Press the button.
1.
Command
5.
Response
1. A command is sent from the host device to the Hand-held Reader Writer.
2. Press the Hand-held Reader Writer activate switch.
3. The Hand-held Reader Writer enters the communication stand-by state with
the Data Carrier, and the operation indicator (LED) is lit green.
4. Communication with the Data Carrier is performed when the Hand-held
Reader Writer antenna is placed near the Data Carrier.
5. A response is given from the Hand-held Reader Writer to the host device.
The operation indicator (LED) is not lit.
Section
Data Carrier
3.
Transmission
with Data Carrier
Data Carrier
4.
Transmission
with Data Carrier
2-7