Hand-held Reader Writer Functions
Button Commands
Host computer
1, 2, 3...
Button commands for communications with the Data Carrier are activated when
the activate switch is pressed after commands are sent from the host device,
and the antenna section of the Hand-held Reader Writer has been brought close
to the Data Carrier. If the antenna is not in front of the Data Carrier when the acti-
vate switch is pressed, a "Data Carrier non-existent error" will result.
Hand-held Reader Writer
3.
Press the button.
1.
Command
5.
Response
1. A command is sent from the host device to the Hand-held Reader Writer.
2. Place the antenna of the Hand-held Reader Writer near the Data Carrier.
3. Press the Hand-held Reader Writer activate switch.
4. The Hand-held Reader Writer conducts communication with the Data Carri-
er. The operation indicator (LED) is lit green.
5. A response is given from the Hand-held Reader Writer to the host device.
The operation indicator (LED) is not lit.
Section
Data Carrier
4.
Transmission
with Data Carrier
2.
2-7
13