Resetting The Tv To Factory Condition; Resetting The Tv To Factory Condition Using Service Mode - Sony KDL-40EX725 Service Manual

RESETTING THE TV TO FACTORY
CONDITION
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
1. Turn the TV On by pressing
2. While holding down the
press the POWER button on the side of the TV.
3. The set restarts and displays the Initial Setup screen.
This may take several minutes.

RESETTING THE TV TO FACTORY CONDITION

USING SERVICE MODE
1. TV must be in standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY Channel
If necessary, press
mode.
3. Press the following buttons on the Remote Commander
within a second of each other:
Press 8 MUTING
"SERVICE" changes to green RST.
RST executes the command and displays EXE.
EXE-RST displays green, then red indicating the TV is
writing the data.
KDL-32EX725/40EX725/46EX725/55EX725
SECTION 7 - SERVICE ADJUSTMENTS
POWER .
on the Remote Commander,
5 Volume + POWER
JUMP or OPTIONS to go to DIGITAL
0 .
4. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER TIMER Standby Standby
5. Cycle AC Power
(Unplug and Plug AC Cord from the AC Outlet).
The set restarts and displays the Initial Setup screen.
This may take several minutes.
POWER POWER
83