Section 3 - Chassis Overview; Overview - Sony KDL-40EX725 Service Manual

SECTION 3 - CHASSIS OVERVIEW

OVERVIEW

The primary circuits contained in the AZ2-F chassis for the consists of a Main Board (designated as the BATV Board), Power Supply Board
(designated as the G10 Board for the 32" models, G4 Board for the 40" models, G5 Board for the 46" models and G6 Board and G8 Board for
the 55" models), the 3D IR Emitter (HEM2 Board), the Switch Unit, the Motion Sensor (HMS3 Board), the IR Board (HLR2 Board), the LCD Panel
Assembly and the LED Drive Board (LD Board)
NOTE: For connector part number information, refer to
page 67.
KDL-32EX725/40EX725/46EX725/55EX725
"Connectors" on page
NOTE: The LD Board is NOT included with the LCD Panel
G10
SWITCH
UNIT
HEM2
FIGURE 3-1. BOARD LAYOUT FOR KDL-32EX725
64. For Wire Dressing information, refer to
LD
BATV
TCON
HLR2
"Wire Dressing" on
HMS3
16