Resetting The Panel Operation Time - Sony KDL-40EX725 Service Manual

13. Wait a minute while lights flash, and initial setup screen
shows.
14. Proceed to "

Resetting the Panel Operation Time

RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the
Self Check screen.
Verify before proceeding to the next step:
; Copied the BU Flash Data
; Confirmed Model ID and Product ID
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY Channel
* NOTE: This differs from accessing Service Adjustments Mode
(Volume +)
SELF CHECK
000 RGB_SEN -------------- -------------- -------------- 00
000 RESERVED
-------------- -------------- -------------- 00
000 RESERVED -------------- -------------- -------------- 00
002 MAIN_POWE
-------------- -------------- -------------- 01
003 DC_ALERT -------------- -------------- -------------- 00
003 AUD_PROT -------------- -------------- -------------- 00
004 BALANCER -------------- -------------- -------------- 00
005 HFR_ERR
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
005 P_ID_ERR
006 BACKLITE -------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
007 TEMP_ERR
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
010 EMITTER
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
101 VPC_WDT
102 MEPS_WDT -------------- -------------- -------------- 00
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
12345-00333-06789 12345-00333-06789 - -
KDL-32EX725/40EX725/46EX725/55EX725
SECTION 7 - SERVICE ADJUSTMENTS
".
5 Volume - POWER
Panel operation time Panel operation time
3. To clear the LCD Panel operating hours of the LCD
Panel after replacing the panel, press
SELF CHECK
000 RGB_SEN
-------------- -------------- -------------- 00
000 RESERVED -------------- -------------- -------------- 00
000 RESERVED
-------------- -------------- -------------- 00
002 MAIN_POWE
-------------- -------------- -------------- 01
003 DC_ALERT
-------------- -------------- -------------- 00
003 AUD_PROT
-------------- -------------- -------------- 00
004 BALANCER
-------------- -------------- -------------- 00
005 HFR_ERR
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
005 P_ID_ERR
006 BACKLITE -------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
007 TEMP_ERR
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
010 EMITTER
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
101 VPC_WDT
-------------- -------------- -------------- 00
102 MEPS_WDT
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
12345-00333-06789 12345-00333-00000 - -
Panel operation time Panel operation time
4. Exit Self Check by pressing
TV power off.
5. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
7 0 .
HOME
and then turn the
81