Updating Service Adjustment Data When Replacing The Lcd Panel; Copying The Bu Flash Data - Sony KDL-40EX725 Service Manual

29. Wait a minute while lights flash, and initial setup screen
shows.
30. TV update is complete.
The additional features of the TV are now available.
UPDATING SERVICE ADJUSTMENT DATA
WHEN REPLACING THE LCD PANEL
Before proceeding, update the software to the latest version. After
updating the software, go into Service Mode to make the appropriate
adjustments to the copy the data onto the panel.
● Copy the BU Flash Data
● Confirm Model ID and Product ID
●
Reset the Panel Operation Time
KDL-32EX725/40EX725/46EX725/55EX725
SECTION 7 - SERVICE ADJUSTMENTS

COPYING THE BU FLASH DATA

This procedure is to copy the White Balance adjustment data from
the TCON Board to the Main Board. The BU Flash service item is
under the VPC service menu.
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY Channel
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.301W00AA
WF1.003W00AA
DF1.001W00AA
YM1.010W00AA
DB2.105W00AA
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
MID:3D65E21C
PID:0E050000
PNL:LTY550HJ0301
POP:X.XXX
3. Press JUMP or OPTIONS
until the VPC menu displays.
VPC
000
000
5 Volume + POWER
SERVICE
---
<EXT>
RF:01.05
WF:2.0.0.99
WF:0B
CAN:X.XXX
FDlXXXX
<PEM>
PM1.012W00LU
PB1.000W00LU
PL1.011J46LUX
PD1.011J46LUX
on the Remote Commander
SERVICE
DATA_COPY
BU_TRANS 0
78