Connecting The Lvds Ffc Connector - Sony KDL-40EX725 Service Manual

CONNECTING THE LVDS FFC CONNECTOR

CAUTION:
The LVDS FFC Connector can be inserted into the Main
Board upside down. If it is inserted upside down, the
pins on the LVDS FFC Connector will short-circuit and
damage the board.
Inserted Correctly
KDL-32EX725/40EX725/46EX725/55EX725
SECTION 1 - SAFETY AND FEATURES
Inserted Incorrectly
Connector Type 1
1. While holding onto the LVDS FFC
Connector, gently tilt the Main
Board connector release towards
the Main Board then slide the
LVDS FFC Connector straight in.
Connector Type 2
1. Gently press down on the release
tab of the Main Board connector.
2. Holding onto the entire LVDS FFC
Connector, insert the LVDS FFC
Connector into the Main Board
connector.
Connector Type 3
1. Gently press down on the 2
release tabs of the Main Board
connector.
2. Holding onto the entire LVDS FFC
Connector, insert the LVDS FFC
Connector into the Main Board
connector.
Main Board
Reinforcement
Tab
Tilt away from LVDS
Press down
Reinforcement
Tab
Main Board
Main Board
Reinforcement
Press down
Tab
4