Updating Service Adjustment Data When Replacing The Main Board; Selecting The Segment Code - Sony KDL-40EX725 Service Manual

UPDATING SERVICE ADJUSTMENT DATA
WHEN REPLACING THE MAIN BOARD
The following procedures must be performed after replacing the
Main Board and updating the software to ensure that the service
adjustment data is accurate.
If the following adjustments are not completed, some of the features
for the television will not be available.
●
Select the Segment Code
● Select the Destination
● Select the Model Name
●
Select the BU Trans
● Add the Serial Number
● Confirm Model ID and Product ID
KDL-32EX725/40EX725/46EX725/55EX725
SECTION 7 - SERVICE ADJUSTMENTS

SELECTING THE SEGMENT CODE

Before proceeding, update the software to the latest version. After
updating the software, go into Service Mode to select the correct
Segment Code data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY Channel 5
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.301W00AA
WF1.003W00AA
DF1.001W00AA
YM1.010W00AA
DB2.105W00AA
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
MID:3D65E21C
PID:0E050000
PNL:LTY550HJ0301
POP:X.XXX
to move to the 002 MODEL category.
3. Press 2
DIGITAL
002 MODEL
000 SEG
Volume + POWER
SERVICE
---
<EXT>
RF:01.05
WF:2.0.0.99
WF:0B
CAN:X.XXX
FDlXXXX
<PEM>
PM1.012W00LU
PB1.000W00LU
PL1.011J46LUX
PD1.011J46LUX
SERVICE
N4
70