Settings Of The Still Image Recorded To A Memory Card - Canon elura10 Instruction Manual

Settings of the Still Image Recorded to a Memory Card

E
CARD
Immediately after you have recorded a still image to a memory card, you can
check the image without switching the operation mode by the POWER dial.
(CARD PHOTO REVIEW)
You can also easily erase unwanted images while viewing still images recorded to
memory card, protect images from accidental erasure, or mark an image for
printing. (File Operation)
• Card Photo Review is set in CARD REC mode and File Operation is set in
CARD PLAY mode.
● Preventing Accidental Erasure (Protect
Select important images and protect them from accidental erasure. If a memory
card is formatted, however, all images, including protected images, will be
permanently erased (
• The pre-recorded sample images provided on the supplied SD Memory Card
are already protected.
There are 3 ways to protect a still image (including the ways to cancel the
setting).
➡ CARD PHOTO REVIEW menu (
1.
CARD
R E C
➡ File Operation menu
2.
CARD
PLAY
➡ Card Operations submenu
3.
CARD
PLAY
● Marking a Still Image for Printing (Print Mark
An image on a memory card must be marked before it can be printed. The camera
supports the
automatically printed on a DPOF-supporting Canon printer. Up to 50 images per
memory card can be print marked.
There are 3 ways to mark a still image for printing (including the ways to cancel
the setting).
To mark an image for printing/erase print marks one at a time
➡ File Operation menu
1.
CARD
PLAY
➡ Card Operations submenu
2.
CARD
PLAY
To erase all print marks
➡ Card Operations submenu
3.
CARD
104
PLAY
117).
SINGLE
DPOF (Digital Print Order Format) print format. Images can be
SINGLE
105)
( 106)
( 107)
INDEX
( 106)
( 108)
INDEX
( 109)
SINGLE
CARD
)
)