Canon elura10 Instruction Manual page 54

Setting the program AE mode
E
CARD
MOVIE P.SCAN
R E C
1. Slide the program selector to Q (program AE) mode.
2. Press the SELECT dial in to display the program menu.
3. Turn the SELECT dial to move the arrow up or down the display.
4. Press the SELECT dial in to select the desired program.
• The program will appear in the display.
• The name of your selected recording program appears constantly on the left of
the display, with the exception of Auto, which is displayed and then disappears
after 4 seconds.
• Avoid changing programs during recording as the brightness of the image may
change suddenly.
• If you switch the camera from the [ program to the
returns to the Auto program.
• When recording in dark places a bright light in the
scene may cause a vertical light bar ("smear") to
appear. This is a normal feature of camcorders.
54
Q
program, the camera