Canon elura10 Instruction Manual page 131

? The playback picture is rough
(with mosaic-like noise).
? There's no picture on the TV
screen, even though the tape is
moving.
? There's no sound coming from the
speaker during playback.
Memory card operations ELURA20 MC only
Problem
? The memory card will not insert.
? The
mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press the
buttons.
• The video heads need cleaning
( 126).
• The video heads need cleaning
( 126).
• The TV/VIDEO selector on the TV
isn't set to VIDEO (
• The speaker has been turned off with
the SELECT dial (
• Headphones are being used.
Cause and/or what to do about it
• It is not turned the right way (
Turn it the right way and try inserting
again.
• Turn the camcorder's power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The POWER dial is not set to CARD
REC or CARD PLAY (
• The memory card is not inserted
( 95).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 110) or insert a new
memory card.
• The power source is not properly
connected ( 11), or the battery
pack is exhausted or not properly
attached ( 12).
• The function can not be used in that
recording program (
30).
28).
95).
98, 102).
53).
131
E